Chalmers MSc Acoustics: Sound and Vibration
Chalmers University of Technology ยท Chalmers University of Technology ยท Gothenburg, Sweden- Full time
- Gothenburg
- 120 ECTS
- English
Tuition, living, application and residence permit.
full programme
120 ECTS full time
Autumn 2027 entry
no band below 5.5
University Admissions
where payable
What is the Chalmers University of Technology MSc Acoustics: Sound and Vibration?
MSc Acoustics: Sound and Vibration is a two-year, full-time 120-ECTS programme taught in English in Gothenburg. The official Chalmers page centres the degree on engineering acoustics, sound and vibration measurement and audio technology. Fee-paying students currently face SEK 380,000 over four semesters. The published study pace is 100 per cent.
Autumn 2027 applications use code CTH-1020X and close on 15 January 2027. A complete two-year funding model is approximately INR 75.23 lakh. It starts with tuition, adds 24 monthly living allowances at Chalmers’ published midpoint, then includes the national application and residence-permit charges. The final thesis should turn acoustic modelling into inspectable evidence rather than a general course claim.
How much does Chalmers MSc Acoustics: Sound and Vibration cost for an Indian student?
The full planning case is SEK 775,040, about INR 75.23 lakh. It combines SEK 380,000 published tuition, 24 months at SEK 16,360, the SEK 900 application fee and the SEK 1,500 residence-permit fee. It isn’t an invoice and doesn’t assume scholarship income.
| Item | INR | Local currency | When it is due |
|---|---|---|---|
| Published full-programme tuition | INR 36.88 lakh | SEK 380,000 | Four semesters at the current fee |
| Living plan for 24 months | INR 38.11 lakh | SEK 392,640 | SEK 16,360 monthly midpoint |
| University Admissions application fee | INR 0.09 lakh | SEK 900 | Due by 1 February 2027 |
| Swedish study residence permit | INR 0.15 lakh | SEK 1,500 | Paid with the permit application |
| Full-programme planning total | INR 75.23 lakh | SEK 775,040 | Before flights, housing deposit and exchange spread |
The Swedish Migration Agency maintenance requirement is evidence of available money, not a second charge. This page counts living costs once. Converted at SEK 1 = INR 9.7064, using ECB reference rates checked 15 October 2026.
The Chalmers scholarship covers tuition, not living or travel costs.Chalmers University of Technology scholarship guidance
Chalmers publishes a monthly living range of SEK 14,360 to SEK 18,360. The midpoint used here is SEK 16,360 for all 24 months, producing SEK 392,640. It is a planning assumption rather than a promise about rent or personal spending.
The maintenance amount used for a Swedish permit is evidence that living money is available, not another charge. Tuition payment, passport, insurance where required and maintenance evidence remain separate permit conditions.
Flights, initial furnishings, a housing deposit and bank conversion spread are excluded. A scholarship should reduce the funding plan only after Chalmers issues a written award.
Can an Indian applicant meet the Chalmers MSc Acoustics: Sound and Vibration entry rules?
The admission decision starts with the transcript. The programme page requires a recognised bachelor’s degree and the exact subject preparation stated for this degree. A related title can’t settle that check. Indian records must also follow the current country instructions.
| Requirement | Published rule | What you do |
|---|---|---|
| Indian degree (India) | An accepted Indian three-year honours bachelor, four-year bachelor, or bachelor plus master totalling four years, subject to the current country instructions | Upload the award, complete transcripts and required university-issued records |
| Programme preparation (India) | a bachelor's in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science | Map official course descriptions to engineering acoustics and sound and vibration measurement |
| English (India) | English 6 or English Level 2, commonly IELTS Academic 6.5 overall with no band below 5.5 | Use the accepted test or documented exemption route |
| GRE or GMAT (India) | Not listed as required on the current programme page | Do not use an optional test to mask missing prerequisite credits |
| Application fee (India) | SEK 900 for applicants required to pay | Pay by the Universityadmissions.se deadline |
List every transcript course that supports engineering acoustics or sound and vibration measurement, with its credits, mark and official syllabus description.
Use assessed projects to demonstrate audio technology. Name the question, method, result and limitation instead of listing software or topics.
Resolve any uncertainty around engineering acoustics, sound and vibration measurement and the formal subject-credit rule before spending money on tests or document preparation.
For MSc Acoustics: Sound and Vibration, a reviewer should be able to trace engineering acoustics to named transcript credits and sound and vibration measurement to official course content. A project involving audio technology can strengthen context, but it cannot silently replace missing academic study where the formal rule asks for credits. The safest mapping gives the original course title, credit value, mark, syllabus page and a short explanation of the match.
The admission risk for MSc Acoustics: Sound and Vibration sits at the edge between a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science and the intended final work. If the record supports engineering acoustics but not sound and vibration measurement, ask whether the published rule permits that gap before applying. If both are visible, use the statement and supporting material to explain why acoustic modelling is the next step, without claiming that motivation overrides the selection process.
An eligibility map for MSc Acoustics: Sound and Vibration should attach engineering acoustics to a transcript entry, sound and vibration measurement to an official description and audio technology to assessed work. The MSc Acoustics: Sound and Vibration file becomes easier to judge when acoustic modelling has a mark or credit value beside it. That evidence must support a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science; a future ambition to become a acoustics engineer cannot fill a missing academic condition.
An eligibility map for MSc Acoustics: Sound and Vibration should attach sound and vibration measurement to a transcript entry, audio technology to an official description and acoustic modelling to assessed work. The MSc Acoustics: Sound and Vibration file becomes easier to judge when engineering acoustics has a mark or credit value beside it. That evidence must support a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science; a future ambition to become a noise and vibration specialist cannot fill a missing academic condition.
An eligibility map for MSc Acoustics: Sound and Vibration should attach audio technology to a transcript entry, acoustic modelling to an official description and engineering acoustics to assessed work. The MSc Acoustics: Sound and Vibration file becomes easier to judge when sound and vibration measurement has a mark or credit value beside it. That evidence must support a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science; a future ambition to become a audio technology engineer cannot fill a missing academic condition.
An eligibility map for MSc Acoustics: Sound and Vibration should attach acoustic modelling to a transcript entry, engineering acoustics to an official description and sound and vibration measurement to assessed work. The MSc Acoustics: Sound and Vibration file becomes easier to judge when audio technology has a mark or credit value beside it. That evidence must support a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science; a future ambition to become a acoustic consultant cannot fill a missing academic condition.
Evidence for MSc Acoustics: Sound and Vibration is strongest when sound and vibration measurement appears in credited study and audio technology appears in assessed application. acoustic modelling can clarify readiness for audio technology engineer, while engineering acoustics can explain interest in acoustic consultant. None of those signals changes the formal requirement that the previous award must satisfy a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science.
Evidence for MSc Acoustics: Sound and Vibration is strongest when audio technology appears in credited study and acoustic modelling appears in assessed application. engineering acoustics can clarify readiness for acoustic consultant, while sound and vibration measurement can explain interest in acoustics engineer. None of those signals changes the formal requirement that the previous award must satisfy a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science.
Evidence for MSc Acoustics: Sound and Vibration is strongest when acoustic modelling appears in credited study and engineering acoustics appears in assessed application. sound and vibration measurement can clarify readiness for acoustics engineer, while audio technology can explain interest in noise and vibration specialist. None of those signals changes the formal requirement that the previous award must satisfy a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science.
Four checks that decide a MSc Acoustics: Sound and Vibration file
A related degree name is not enough
Chalmers can assess the content and credits behind the award. The file needs a clear map to a bachelor’s in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science.
Eligibility does not predict selection
Meeting the published minimum allows assessment. It does not create an admission probability or offer promise.
English evidence follows the national route
An Indian medium-of-instruction claim is not automatically interchangeable with every accepted English route. Use the current country instructions.
Professional recognition remains separate
MSc Acoustics: Sound and Vibration is an academic award. Regulated practice and employer language requirements can create additional steps.
How should an Indian applicant apply for Chalmers MSc Acoustics: Sound and Vibration in 2027?
Apply through University Admissions using code CTH-1020X by 15 January 2027. Upload the programme evidence, follow the India document instructions, and complete required documents and the SEK 900 fee by 1 February. An application is incomplete while a required payment or record is missing.
Rank application code CTH-1020X, submit academic and English evidence, pay the fee where required, then complete tuition and residence-permit steps after an offer.
| Start by | Task | Takes | Why this date |
|---|---|---|---|
| 02 Aug 2026 | Secure English evidence | 75 days | Complete an accepted test or documented exemption route. |
| 26 Aug 2026 | Audit subject eligibility | 21 days | Match previous study to a bachelor's in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science. |
| 16 Sep 2026 | Prepare Indian academic documents | 30 days | Follow the India country instructions and programme document list. |
| 16 Oct 2026 | Submit by 15 January | 1 day | Rank the exact programme and save payment and submission receipts. |
| 17 Oct 2026 | Pay tuition and apply for the permit | 90 days | Use admission, tuition payment, insurance where required and maintenance evidence. |
The allowances are Nbyula planning estimates, not processing times published by Chalmers University of Technology.
Build the academic case around engineering acoustics and sound and vibration measurement. Those are easier to verify than general enthusiasm for engineering acoustics, sound and vibration measurement, audio technology.
Fee-paying applicants should prepare loan or family-funding evidence before the decision because the first tuition instalment must be paid before the residence-permit application.
The residence permit is a separate decision. Admission does not waive the full-time study, tuition, maintenance, passport or insurance conditions.
Required documents and the application fee are due by 1 February 2027. The programme deadline does not end the evidence chain.
What jobs can follow the Chalmers MSc Acoustics: Sound and Vibration?
The curriculum can support directions such as acoustics engineer, noise and vibration specialist, audio technology engineer and acoustic consultant. Chalmers publishes no guaranteed placement or programme salary. An eligible graduate may use the Swedish post-study permit to look for work or examine a business idea, but the permit does not create employment.
| Measure | Figure | Basis |
|---|---|---|
| Engineering Acoustics | Acoustics Engineer | Evidence from assessed engineering acoustics |
| Sound And Vibration Measurement | Noise And Vibration Specialist | Portfolio signal from sound and vibration measurement |
| Audio Technology | Audio Technology Engineer | Needs coherent audio technology evidence |
| Placement guarantee | None published | Hiring and work status remain separate |
These MSc Acoustics: Sound and Vibration directions come from the official programme content. They are not placement probabilities, salary forecasts, employer promises or sponsorship claims.
For acoustics engineer, retain one strong output from engineering acoustics and explain the problem, method, result and limitation.
For noise and vibration specialist, use a different piece of assessed work from sound and vibration measurement; relabelling one assignment for several roles weakens the portfolio.
For audio technology engineer, connect audio technology to an independent acoustics: sound and vibration master’s thesis so the application shows progression rather than topic collecting.
For acoustic consultant, check Swedish-language, professional-recognition and employer requirements that sit outside the academic degree.
A acoustics engineer story from MSc Acoustics: Sound and Vibration should centre on engineering acoustics; a noise and vibration specialist story should instead centre on sound and vibration measurement. The distinction matters because one generic portfolio cannot prove every direction. For audio technology engineer, evidence from audio technology becomes stronger when it records a rejected approach, a measured result and a limitation. For acoustic consultant, the final project should show research discipline rather than only topic interest.
The market test for MSc Acoustics: Sound and Vibration is therefore concrete. Search current vacancies for acoustics engineer and audio technology engineer, list the methods they repeatedly request, and compare those methods with engineering acoustics, audio technology and acoustic modelling. Where Swedish, professional registration or prior industry experience appears, record it as an external condition. The degree can build evidence, but it cannot erase conditions set by an employer or regulator.
A portfolio from MSc Acoustics: Sound and Vibration can separate audio technology engineer evidence built through sound and vibration measurement from acoustic consultant evidence built through audio technology. Work in acoustic modelling may support acoustics engineer, whereas engineering acoustics may be more useful for noise and vibration specialist. Keeping those outputs distinct makes the graduate’s contribution easier to assess without turning the degree into a claim of guaranteed hiring.
A portfolio from MSc Acoustics: Sound and Vibration can separate acoustic consultant evidence built through audio technology from acoustics engineer evidence built through acoustic modelling. Work in engineering acoustics may support noise and vibration specialist, whereas sound and vibration measurement may be more useful for audio technology engineer. Keeping those outputs distinct makes the graduate’s contribution easier to assess without turning the degree into a claim of guaranteed hiring.
A portfolio from MSc Acoustics: Sound and Vibration can separate acoustics engineer evidence built through acoustic modelling from noise and vibration specialist evidence built through engineering acoustics. Work in sound and vibration measurement may support audio technology engineer, whereas audio technology may be more useful for acoustic consultant. Keeping those outputs distinct makes the graduate’s contribution easier to assess without turning the degree into a claim of guaranteed hiring.
Who is the Chalmers MSc Acoustics: Sound and Vibration for, and who should avoid it?
A strong fit already proves engineering acoustics, needs new depth in audio technology and can fund INR 75.23 lakh without promised work. Under the current rules, a weak fit needs prerequisite repair, professional licensing the degree does not supply or a guaranteed placement.
| Verdict | Your background | Why |
|---|---|---|
| Strong fit | Prepared for engineering acoustics | Earlier study supports progression into sound and vibration measurement. |
| Strong fit | Needs assessed work in audio technology | An independent acoustics: sound and vibration master's thesis can create inspectable evidence. |
| Needs evidence | Choosing between acoustics engineer and noise and vibration specialist | Electives and project work must make acoustic modelling serve one direction. |
| Needs evidence | Funding is near the ceiling | The INR 75.23 lakh case excludes flights and a housing deposit. |
| Do not shortlist | Missing engineering acoustics foundations | A statement cannot replace programme prerequisites. |
| Do not shortlist | Needs guaranteed employment | No exact-programme placement or salary guarantee is published. |
The first test places engineering acoustics beside the transcript and sound and vibration measurement beside official syllabus evidence. Any unresolved credit gap belongs in the decision before application.
The second is whether audio technology adds depth instead of repeating familiar engineering acoustics work.
The third is whether an independent acoustics: sound and vibration master’s thesis produces evidence useful for acoustics engineer or audio technology engineer.
The final test is financial. SEK 775,040 should work before uncertain earnings, an unawarded scholarship or a future job offer.
The negative-fit test for MSc Acoustics: Sound and Vibration asks whether engineering acoustics and sound and vibration measurement lead to the work the applicant actually wants. This boundary matters more than a general preference for Sweden. It also separates academic fit from affordability: an applicant can meet every subject condition yet still decline the programme if SEK 775,040 would require optimistic employment or an unconfirmed tuition scholarship.
MSc Acoustics: Sound and Vibration fits an applicant who already handles engineering acoustics but needs stronger sound and vibration measurement for acoustics engineer work. It is less efficient when both audio technology and acoustic modelling are already visible in recent assessed work. For that second profile, an independent acoustics: sound and vibration master’s thesis must offer a new problem or method. Without that addition, MSc Acoustics: Sound and Vibration risks repeating capability at a high Swedish study cost.
MSc Acoustics: Sound and Vibration fits an applicant who already handles sound and vibration measurement but needs stronger audio technology for noise and vibration specialist work. It is less efficient when both acoustic modelling and engineering acoustics are already visible in recent assessed work. For that second profile, an independent acoustics: sound and vibration master’s thesis must offer a new problem or method. Without that addition, MSc Acoustics: Sound and Vibration risks repeating capability at a high Swedish study cost.
MSc Acoustics: Sound and Vibration fits an applicant who already handles audio technology but needs stronger acoustic modelling for audio technology engineer work. It is less efficient when both engineering acoustics and sound and vibration measurement are already visible in recent assessed work. For that second profile, an independent acoustics: sound and vibration master’s thesis must offer a new problem or method. Without that addition, MSc Acoustics: Sound and Vibration risks repeating capability at a high Swedish study cost.
MSc Acoustics: Sound and Vibration fits an applicant who already handles acoustic modelling but needs stronger engineering acoustics for acoustic consultant work. It is less efficient when both sound and vibration measurement and audio technology are already visible in recent assessed work. For that second profile, an independent acoustics: sound and vibration master’s thesis must offer a new problem or method. Without that addition, MSc Acoustics: Sound and Vibration risks repeating capability at a high Swedish study cost.
Before choosing MSc Acoustics: Sound and Vibration, place sound and vibration measurement beside current ability and audio technology beside the intended audio technology engineer role. If both columns already contain strong proof, examine whether acoustic modelling or engineering acoustics still creates a worthwhile gap. The course is a better fit when an independent acoustics: sound and vibration master’s thesis develops something the applicant cannot yet demonstrate.
Before choosing MSc Acoustics: Sound and Vibration, place audio technology beside current ability and acoustic modelling beside the intended acoustic consultant role. If both columns already contain strong proof, examine whether engineering acoustics or sound and vibration measurement still creates a worthwhile gap. The course is a better fit when an independent acoustics: sound and vibration master’s thesis develops something the applicant cannot yet demonstrate.
Before choosing MSc Acoustics: Sound and Vibration, place acoustic modelling beside current ability and engineering acoustics beside the intended acoustics engineer role. If both columns already contain strong proof, examine whether sound and vibration measurement or audio technology still creates a worthwhile gap. The course is a better fit when an independent acoustics: sound and vibration master’s thesis develops something the applicant cannot yet demonstrate.
What does Chalmers MSc Acoustics: Sound and Vibration teach?
The official Chalmers course-list PDF names the components below but does not itemise ECTS for each row. Labels show whether each course is compulsory, compulsory elective or elective. The list is subject to change, and specialisation rules determine which combination a student completes.
| Component | ECTS | Where it sits |
|---|---|---|
| Introduction to audio technology and acoustics | Year 1, compulsory | |
| Sound and vibration measurements 1 | Year 1, compulsory | |
| Sound and vibration measurements 2 | Year 1, compulsory | |
| Structure-borne sound | Year 1, compulsory | |
| Applied vehicle acoustics | Year 1, compulsory elective | |
| Urban acoustics | Year 1, compulsory elective | |
| Architectural acoustics | Year 1, compulsory elective | |
| Flow acoustics | Year 1, compulsory elective | |
| Music engineering | Year 1, compulsory elective | |
| Artificial intelligence in music computing | Year 1, compulsory elective | |
| Audio virtual reality | Year 1, compulsory elective | |
| Sound, brain, and health | Year 2, compulsory elective | |
| Acoustic design of products | Year 2, compulsory elective | |
| Applied artificial intelligence | Year 2, compulsory elective | |
| Applied signal processing | Year 2, compulsory elective | |
| Master's thesis | Year 2, compulsory |
- The complete degree carries 120 ECTS.
- A 30-credit flexibility window is available in year two.
- The published course list is subject to change.
The useful progression moves from engineering acoustics into sound and vibration measurement before an independent acoustics: sound and vibration master’s thesis. The PDF lists options across specialisations, so it should not be read as a promise that every student takes every elective.
Applicants targeting acoustics engineer should use the thesis and assessed project work to show method, result and limitation. A long module list alone does not demonstrate that contribution.
Should an Indian applicant shortlist the Chalmers MSc Acoustics: Sound and Vibration?
Shortlist this programme when your academic record already proves engineering acoustics, you need assessed depth in audio technology, and the published MSc Acoustics: Sound and Vibration route matches the final work you want to produce. Funding must also cover the INR 75.23 lakh planning case without assumed earnings.
The clearest value is the progression from sound and vibration measurement through acoustic modelling into an independent acoustics: sound and vibration master's thesis. That can support evidence for acoustics engineer or noise and vibration specialist, but the university doesn't publish a placement or salary guarantee for this exact degree.
The main limitation is specific. The programme assumes mathematical and physical acoustics foundations, while audio interest alone does not meet the entry map. The Chalmers tuition scholarships can remove tuition for a selected applicant, but it does not cover living costs and should not be treated as available money before an award.
- Chalmers MSc Acoustics: Sound and Vibration is a full-time, English-taught 120-ECTS programme over two years.
- Published full tuition is SEK 380,000 for a fee-paying student.
- The full planning case is SEK 775,040, about INR 75.23 lakh, before flights and a housing deposit.
- Autumn 2027 applications close on 15 January, with required documents and the application fee due by 1 February.
- The academic decision turns on a bachelor's in architecture and engineering, civil, electrical or mechanical engineering, engineering mathematics, physics, acoustics or equivalent, including at least 10 credits of mathematics and 6 credits of environmental or sustainability science.
- Chalmers publishes no audited exact-programme placement rate or median salary.
Frequently asked questions
How much is Chalmers MSc Acoustics: Sound and Vibration for an Indian student?
Published full tuition is SEK 380,000. The complete planning case is SEK 775,040, about INR 75.23 lakh, combining tuition, 24 months at SEK 16,360, the SEK 900 application fee and the SEK 1,500 permit fee. Flights, a housing deposit, furnishings and exchange spread remain outside the estimate.
What is the 2027 deadline for Chalmers MSc Acoustics: Sound and Vibration?
Applications for Autumn 2027 open on 16 October 2026 and close on 15 January 2027. The programme uses application code CTH-1020X. Required documents and the SEK 900 application fee are due by 1 February, so the academic deadline is not the end of the evidence process.
What academic background does Chalmers MSc Acoustics: Sound and Vibration require?
Chalmers requires a recognised bachelor's-level qualification and the programme's exact subject preparation. The transcript and official course descriptions must substantiate the named subjects, methods and credit volumes on the programme page. A related degree title, short course or work history cannot automatically replace missing university study.
Does Chalmers MSc Acoustics: Sound and Vibration require GRE or GMAT?
No GRE or GMAT requirement is listed on the current programme page. Chalmers instead assesses the recognised qualification, exact subject preparation, English evidence and the complete application. A voluntary score cannot repair missing academic credits, an incomplete transcript, absent programme material or a required application fee paid after the deadline.
Is Chalmers MSc Acoustics: Sound and Vibration full time?
Yes. This page covers the English-taught, full-time campus programme in Gothenburg. It carries 120 ECTS over two academic years at 100 per cent study pace. Its tuition, living-cost and permit assumptions should not be reused for an exchange semester, short course, part-time route or another programme with a different published fee.
Does Chalmers MSc Acoustics: Sound and Vibration guarantee a job?
No. The curriculum can build evidence relevant to acoustics engineer, noise and vibration specialist or audio technology engineer, but Chalmers publishes no audited placement rate, median salary or employer guarantee for this exact programme. Employers also assess experience, portfolio quality, language, professional recognition and work rights, while the post-study permit provides search time rather than employment.
Sources
These sources support the programme, admission, cost and immigration information used on this page.
Sources checked on October 22, 2026. Current intake information follows. Autumn 2027 full-time campus intake.
More programmes
