,
Edwin Selvaraj Avatar

ยท

Chalmers MSc Systems, Learning and Control

Chalmers University of Technology ยท Master's studies ยท Gothenburg, Sweden
  • Full time, 24 months
  • English
  • 120 ECTS
28 min read · Published on September 29, 2026 · Updated on September 29, 2026
Full-programme planINR 74.77 lakh

Tuition, living and fees for the full two years.

TuitionSEK 95,000

per semester, 2027/28

Duration24 months

120 ECTS full time

Deadline15 January

autumn 2027 intake

EnglishIELTS 6.5

no band below 5.5

GRE / GMATNot required

not in published rules

ApplicationNational portal

UniversityAdmissions.se

What is the Chalmers MSc Systems, Learning and Control?

Chalmers MSc Systems, Learning and Control is a full-time, two-year, 120-ECTS degree in automation, control, robotics, learning systems and electromobility. The official programme profile confirms English daytime study in Gothenburg. Tuition for a fee-paying student entering in 2027 is SEK 380,000, and the full planning total is INR 74.77 lakh including tuition, Chalmers’ midpoint living estimate and application charges.

The programme links control systems with automation, while robot learning supports later work in electromobility. This page covers the autumn 2027 cycle opening on 16 October 2026 and closing on 15 January 2027. Chalmers has published its new programme and specialisation structure, but not a complete module-by-module timetable for every route.

How much does the Chalmers MSc Systems, Learning and Control cost?

The two-year planning total is SEK 775,040, about INR 74.77 lakh. Chalmers’ 2027/28 fee table sets this programme’s tuition at SEK 95,000 per semester. The total uses the midpoint of the university’s published monthly living range and includes the national application and residence-permit fees.

ItemINRLocal currencyWhen it is due
Tuition for four semestersINR 36.66 lakhSEK 380,000One semester at a time
Living plan for 24 monthsINR 37.88 lakhSEK 392,640Monthly during study
University Admissions application feeINR 8,682SEK 900By 1 February 2027
Swedish study residence permitINR 14,471SEK 1,500After admission and tuition payment
Full-programme planning totalINR 74.77 lakhSEK 775,040Across application and 24 months

The living amount is spending across 24 months, not a second university charge. The Migration Agency separately requires proof that the student can support the full permit period. Converted at SEK 1 = INR 9.6471, the ECB reference rates for 28 September 2026. Flights, housing deposits, furnishings and exchange spreads are excluded.

โ€œAll deadlines are at midnight CET (Central European Time) on the date indicated. Please note that the dates below may be subject to change.โ€Chalmers, key dates for master’s studies

Tuition contributes SEK 380,000 across four semesters. Chalmers has already published the 2027/28 category at SEK 95,000 per semester, so this is the current fee for the entry cycle rather than an older price carried forward. A scholarship is competitive and doesn’t reduce the cash plan until the award is confirmed.

Chalmers estimates monthly living at SEK 14,360 to SEK 18,360. This page uses the SEK 16,360 midpoint, which produces SEK 392,640 across 24 months. Housing alone is listed at SEK 4,000 to SEK 8,000, so the lower end depends on securing cheaper accommodation rather than assuming it will appear after arrival.

The Chalmers scholarship application is separate and runs from late November 2026 to mid-January 2027. An applicant needs the University Admissions application number first. Awards remain programme-specific and are normally tuition reductions, so they don’t replace the living-funds evidence needed for a residence permit.

Advertisements

Can an Indian applicant meet the Chalmers MSc Systems, Learning and Control entry rules?

Admission needs a recognised bachelor equivalent to at least three years and 180 Swedish credits, plus the exact subjects on the programme page. The English floor is IELTS Academic 6.5 with no band below 5.5. The India document rules accepts a three-year honours bachelor, a four-year bachelor or a bachelor plus master totalling four years.

RequirementPublished ruleWhat you do
Previous degree (India) (India)Three-year honours bachelor, four-year bachelor, or bachelor plus master totalling four yearsUpload the university-issued award and all-semester transcript
Programme subject rule (India)Bachelor's degree in: Mechatronics Engineering, Mechanical Engineering, Electrical Engineering, Engineering Physics, Chemical Engineering, Computer Engineering, Engineering Mathematics Prerequisites: Mathematics (at least 30 cr. including Linear Algebra, Multivariable Analysis, Transforms, Mathematical Statistics), Automatic Control (including PID Controllers, State-Space Models, Stability Analysis of Transfer Functions and State-Space Models, Linearisation of Nonlinear Models, Bode and Nyquist Map passed courses to every named prerequisite
Academic result (India)No published minimum CGPA; eligible applicants compete on overall strengthSubmit the awarded CGPA, grading scale and supporting syllabus
English (India)IELTS Academic 6.5 overall with no section below 5.5Use an accepted test or a documented Indian school route
University documents (India)University-issued diploma and signed all-semester transcriptDo not use college-only or DigiLocker verification
GRE / GMAT (India)Not published as requiredDo not substitute a test for missing subject courses

The subject review for MSc Systems, Learning and Control is narrower than a broad equivalence decision. A recognised bachelor can still fall short when module descriptions don’t show control systems, robot learning or the research preparation needed for graduate work in automation, control, robotics, learning systems and electromobility.

Indian transcripts often compress several topics into one paper title. The useful evidence is the syllabus page that separates automation from electromobility, together with credits, contact hours and the assessed project. That evidence lets the faculty see content that the marksheet title hides.

English evidence is a completed-file rule, not a condition that can be repaired after the deadline. The published standard of IELTS Academic 6.5 overall with no section below 5.5 must be met with an accepted test type, and Chalmers says the file isn’t processed when the official certificate is absent by the closing date.

The most defensible file connects one bachelor project to control systems, one quantitative or design module to robot learning, and one independent assignment to automation. Together they answer the academic-fit question more precisely than a general statement that the prior degree was related.

MSc Systems, Learning and Control uses control systems to frame Control Systems, while robot learning gives Robot Learning its working method; That combination matters for a future control engineer because automation must produce evidence, not only vocabulary; Within Automation, electromobility can sharpen the same profile for robotics engineer; A plan that names Control Systems, Robot Learning and Automation without connecting control systems, robot learning and automation would remain broad despite the programme’s specialist options.

MSc Systems, Learning and Control uses robot learning to frame Robot Learning, while automation gives Automation its working method; That combination matters for a future robotics engineer because electromobility must produce evidence, not only vocabulary; Within Electromobility, control systems can sharpen the same profile for autonomous-systems developer; A plan that names Robot Learning, Automation and Electromobility without connecting robot learning, automation and electromobility would remain broad despite the programme’s specialist options.

MSc Systems, Learning and Control uses automation to frame Automation, while electromobility gives Electromobility its working method; That combination matters for a future autonomous-systems developer because control systems must produce evidence, not only vocabulary; Within Control Systems, robot learning can sharpen the same profile for control engineer; A plan that names Automation, Electromobility and Control Systems without connecting automation, electromobility and control systems would remain broad despite the programme’s specialist options.

MSc Systems, Learning and Control uses electromobility to frame Electromobility, while control systems gives Control Systems its working method; That combination matters for a future control engineer because robot learning must produce evidence, not only vocabulary; Within Robot Learning, automation can sharpen the same profile for robotics engineer; A plan that names Electromobility, Control Systems and Robot Learning without connecting electromobility, control systems and robot learning would remain broad despite the programme’s specialist options.

MSc Systems, Learning and Control uses control systems to frame Control Systems, while robot learning gives Robot Learning its working method; That combination matters for a future robotics engineer because automation must produce evidence, not only vocabulary; Within Automation, electromobility can sharpen the same profile for autonomous-systems developer; A plan that names Control Systems, Robot Learning and Automation without connecting control systems, robot learning and automation would remain broad despite the programme’s specialist options.

For MSc Systems, Learning and Control, earlier control systems should be visible beside assessed robot learning; The description for Control Systems can then be matched to a bachelor task involving automation; Evidence from Robot Learning is stronger when its workload, method and result are stated; Evidence for Automation is weaker when a transcript merely gives a short title; This distinction lets the subject review separate real electromobility preparation from a similarly named elective.

For MSc Systems, Learning and Control, earlier robot learning should be visible beside assessed automation; The description for Robot Learning can then be matched to a bachelor task involving electromobility; Evidence from Automation is stronger when its workload, method and result are stated; Evidence for Electromobility is weaker when a transcript merely gives a short title; This distinction lets the subject review separate real control systems preparation from a similarly named elective.

For MSc Systems, Learning and Control, earlier automation should be visible beside assessed electromobility; The description for Automation can then be matched to a bachelor task involving control systems; Evidence from Electromobility is stronger when its workload, method and result are stated; Evidence for Control Systems is weaker when a transcript merely gives a short title; This distinction lets the subject review separate real robot learning preparation from a similarly named elective.

For MSc Systems, Learning and Control, earlier electromobility should be visible beside assessed control systems; The description for Electromobility can then be matched to a bachelor task involving robot learning; Evidence from Control Systems is stronger when its workload, method and result are stated; Evidence for Robot Learning is weaker when a transcript merely gives a short title; This distinction lets the subject review separate real automation preparation from a similarly named elective.

For MSc Systems, Learning and Control, earlier control systems should be visible beside assessed robot learning; The description for Control Systems can then be matched to a bachelor task involving automation; Evidence from Robot Learning is stronger when its workload, method and result are stated; Evidence for Automation is weaker when a transcript merely gives a short title; This distinction lets the subject review separate real electromobility preparation from a similarly named elective.

A control engineer case built through MSc Systems, Learning and Control can begin with control systems, move through Control Systems, and end with a tested robot learning result; A robotics engineer case would put more weight on Robot Learning, especially where automation changes a design or analytical decision; For autonomous-systems developer, Automation can supply the context while electromobility supplies the method; These paths overlap, but their strongest artefacts answer different employers and should not be presented as one generic portfolio.

A robotics engineer case built through MSc Systems, Learning and Control can begin with robot learning, move through Robot Learning, and end with a tested automation result; A autonomous-systems developer case would put more weight on Automation, especially where electromobility changes a design or analytical decision; For control engineer, Electromobility can supply the context while control systems supplies the method; These paths overlap, but their strongest artefacts answer different employers and should not be presented as one generic portfolio.

A autonomous-systems developer case built through MSc Systems, Learning and Control can begin with automation, move through Automation, and end with a tested electromobility result; A control engineer case would put more weight on Electromobility, especially where control systems changes a design or analytical decision; For robotics engineer, Control Systems can supply the context while robot learning supplies the method; These paths overlap, but their strongest artefacts answer different employers and should not be presented as one generic portfolio.

A control engineer case built through MSc Systems, Learning and Control can begin with electromobility, move through Electromobility, and end with a tested control systems result; A robotics engineer case would put more weight on Control Systems, especially where robot learning changes a design or analytical decision; For autonomous-systems developer, Robot Learning can supply the context while automation supplies the method; These paths overlap, but their strongest artefacts answer different employers and should not be presented as one generic portfolio.

A robotics engineer case built through MSc Systems, Learning and Control can begin with control systems, move through Control Systems, and end with a tested robot learning result; A autonomous-systems developer case would put more weight on Robot Learning, especially where automation changes a design or analytical decision; For control engineer, Automation can supply the context while electromobility supplies the method; These paths overlap, but their strongest artefacts answer different employers and should not be presented as one generic portfolio.

Someone ready for MSc Systems, Learning and Control can explain how control systems led to robot learning in an assessed bachelor task; Interest in Control Systems then has an academic base, and Robot Learning becomes a credible next step toward control engineer; Someone missing automation may still have relevant experience, but Automation could expose that gap during admission; Someone uninterested in electromobility would also lose part of the programme’s value for a later robotics engineer direction.

Someone ready for MSc Systems, Learning and Control can explain how robot learning led to automation in an assessed bachelor task; Interest in Robot Learning then has an academic base, and Automation becomes a credible next step toward robotics engineer; Someone missing electromobility may still have relevant experience, but Electromobility could expose that gap during admission; Someone uninterested in control systems would also lose part of the programme’s value for a later autonomous-systems developer direction.

Someone ready for MSc Systems, Learning and Control can explain how automation led to electromobility in an assessed bachelor task; Interest in Automation then has an academic base, and Electromobility becomes a credible next step toward autonomous-systems developer; Someone missing control systems may still have relevant experience, but Control Systems could expose that gap during admission; Someone uninterested in robot learning would also lose part of the programme’s value for a later control engineer direction.

Someone ready for MSc Systems, Learning and Control can explain how electromobility led to control systems in an assessed bachelor task; Interest in Electromobility then has an academic base, and Control Systems becomes a credible next step toward control engineer; Someone missing robot learning may still have relevant experience, but Robot Learning could expose that gap during admission; Someone uninterested in automation would also lose part of the programme’s value for a later robotics engineer direction.

Someone ready for MSc Systems, Learning and Control can explain how control systems led to robot learning in an assessed bachelor task; Interest in Control Systems then has an academic base, and Robot Learning becomes a credible next step toward robotics engineer; Someone missing automation may still have relevant experience, but Automation could expose that gap during admission; Someone uninterested in electromobility would also lose part of the programme’s value for a later autonomous-systems developer direction.

Three checks that can reject an Indian file

  1. Passed courses decide subject eligibility

    Chalmers counts only passed courses toward specific requirements. A related bachelor title doesn’t replace the published preparation in control systems, robot learning and the other named subjects.

  2. College documents can fail the national check

    University Admissions doesn’t accept a college-issued marksheet or diploma unless the college is autonomous. The diploma, provisional certificate and semester records must come from the awarding university, and DigiLocker verification isn’t accepted under the current India instructions.

  3. Eligibility doesn't create a CGPA guarantee

    Chalmers publishes no minimum CGPA because selection also considers place availability and the overall strength of the completed application. Clearing the degree, subject and English rules enters the competition. It doesn’t predict an offer.

How should an Indian applicant apply for the Chalmers MSc Systems, Learning and Control?

The academic application goes through UniversityAdmissions.se and the residence application begins only after admission and first-semester tuition payment. The autumn 2027 calendar closes programme choices on 15 January 2027 and supporting documents plus the SEK 900 fee on 1 February.

UniversityAdmissions.se application, Chalmers admission and tuition payment, then a Swedish Migration Agency residence application.

Start byTaskTakesWhy this date
16 Aug 2026Complete English evidence45 daysAllow testing and result verification if school evidence doesn't qualify.
17 Sep 2026Map programme fit10 daysMatch passed bachelor courses to the Chalmers prerequisites.
27 Sep 2026Submit and rank choices3 daysUse UniversityAdmissions.se before 15 January.
30 Sep 2026Complete documents and fee17 daysFinish the file by 1 February 2027.
17 Oct 2026Pay tuition and apply for residence90 daysThe current 75th-percentile decision time is three months.

The allowances are Nbyula planning estimates, not processing times published by Chalmers University of Technology.

The national portal allows up to four master’s choices, and their order matters because an offer can remove lower-ranked choices. Keep the Chalmers programme at the position the applicant would genuinely accept rather than treating ranking as an administrative detail.

A complete Indian file includes the university-issued degree or provisional award, every semester transcript, passport identity page, programme-specific course evidence and English proof where school evidence doesn’t qualify. Chalmers recommends its Specific Entry Requirement Form, but it doesn’t replace the underlying documents.

The 1 April admission decision leaves a short chain. First-semester tuition must reach Chalmers by 1 May, and fee payment is required before the residence application. The Migration Agency currently reports three months for 75 per cent of recent higher-education cases, so delaying payment consumes the visa window.

Advertisements

What jobs can follow the Chalmers MSc Systems, Learning and Control?

Career evidence should follow the specialisation and thesis described on the programme page. Chalmers publishes no audited programme-level placement rate or starting-salary distribution for this new 2027 degree. Sweden’s post-study job-search permit can last up to one year, but it is permission to search rather than an employment result.

MeasureFindingBasis
Primary role directioncontrol engineercontrol systems and robot learning
Second role directionrobotics engineerautomation and thesis evidence
Programme placement rateNot publishedNo cohort series for the new MSc Systems, Learning and Control
Post-study searchUp to 1 yearSwedish graduate residence route

The job-search permit requires completed studies, an application before the study permit expires, financial support and health-insurance evidence. It isn't a job offer, salary guarantee or permanent residence.

The clearest portfolio direction joins control systems with robot learning for work as a control engineer. A project should show the question, method, result and limitation. A list of software or laboratory tools proves far less than one traceable decision made with those tools.

A second route links automation to robotics engineer. Here the differentiator isn’t the programme title but the chosen specialisation, internship or thesis evidence. Chalmers publishes no guaranteed recruiter list or cohort salary series for MSc Systems, Learning and Control, so the page doesn’t turn curriculum into a placement promise.

The autonomous-systems developer path is credible when the final project uses electromobility on a problem an employer or research group recognises. It is weaker when every assessed output remains broad and none demonstrates ownership of a complete technical or analytical task.

The Swedish orientation year creates job-search time after an eligible degree, but it doesn’t supply employment. Language needs, professional recognition and the match between the thesis and the vacancy remain separate decisions after graduation.

For MSc Systems, Learning and Control, the decisive comparison is control systems against robot learning; MSc Systems, Learning and Control gives both subjects room, yet automation, control, robotics, learning systems and electromobility rewards a deliberate centre of gravity; MSc Systems, Learning and Control can support control engineer when automation reinforces that centre; MSc Systems, Learning and Control can support robotics engineer when electromobility changes the project question; The same degree therefore produces different value from different course plans.

Against a neighbouring degree, MSc Systems, Learning and Control should win because automation, control, robotics, learning systems and electromobility is the intended work, not because Chalmers offers many choices; MSc Systems, Learning and Control deserves the investment when control systems and automation belong in the same future role; It loses the comparison when the required foundational base is absent; That mismatch is substantial enough to outweigh university brand or city preference.

The admission proof for MSc Systems, Learning and Control begins with relevant bachelor’s preparation; Within MSc Systems, Learning and Control, control systems establishes the base and robot learning tests its depth; For MSc Systems, Learning and Control, a syllabus showing automation is more useful than a generic department description; For MSc Systems, Learning and Control, a project using electromobility is more useful than an interest statement; Each item answers a different part of the published academic review.

An Indian marksheet may support MSc Systems, Learning and Control without using Chalmers’s vocabulary; MSc Systems, Learning and Control evidence can still be precise when the applicant supplies credits, weekly content, assessment and project output; MSc Systems, Learning and Control reviewers can then relate local course names to control systems, robot learning, automation and electromobility; This translation of academic content isn’t grade conversion; It is proof of what the bachelor actually covered.

The employment case for MSc Systems, Learning and Control is strongest when control systems produces evidence for control engineer; In MSc Systems, Learning and Control, robot learning can add a second method without diluting the first; Through MSc Systems, Learning and Control, automation can expose a result to real constraints; After MSc Systems, Learning and Control, electromobility can explain why the graduate fits robotics engineer rather than every role carrying a related title.

A thesis from MSc Systems, Learning and Control can speak to autonomous-systems developer when its question belongs to automation, control, robotics, learning systems and electromobility; A project from MSc Systems, Learning and Control can speak to control engineer when control systems and robot learning are both visible; An internship within MSc Systems, Learning and Control can support robotics engineer when automation changes a real decision; None of those routes creates a placement statistic, but each creates evidence an employer can inspect.

A direct-fit candidate for MSc Systems, Learning and Control already understands control systems and can demonstrate robot learning; A conditional-looking candidate for MSc Systems, Learning and Control may recognise automation but lack assessed work; A weak MSc Systems, Learning and Control plan avoids electromobility even though the intended role depends on it; These distinctions matter before application because the master’s allocates advanced credits, not remedial bachelor teaching.

The financial fit for MSc Systems, Learning and Control also follows the academic fit; Funding 24 months is rational when MSc Systems, Learning and Control advances a plausible control engineer or robotics engineer path; Funding MSc Systems, Learning and Control is harder to justify when the intended occupation is autonomous-systems developer but the course plan never uses automation or electromobility; A named outcome needs matching evidence inside the degree plan.

Who is the Chalmers MSc Systems, Learning and Control for?

The strongest fit has assessed preparation in control systems and robot learning, can fund 24 months and wants a career using automation, control, robotics, learning systems and electromobility. It isn't a strong fit when the master's must supply bachelor-level foundations or leads toward work outside this curriculum.

VerdictYour backgroundWhy
Strong fitGraduate with evidence in control systems and robot learningThe transcript can answer the core subject review.
Strong fitApplicant targeting work as a control engineerThe curriculum can build a coherent portfolio around automation, control, robotics, learning systems and electromobility.
Needs evidenceRelated graduate missing automationA related award title may not satisfy the programme's content test.
Do not shortlistApplicant outside the published academic scopeThe route advances control systems and robot learning; it doesn't rebuild their bachelor foundations.

A strong match already holds evidence in control systems and wants to deepen it through the published option most aligned with that direction. The programme then adds a coherent direction rather than repairing the basic bachelor curriculum.

A borderline match may understand robot learning but have no assessed work in automation. That gap belongs in the admission calculation because a later elective can’t retroactively satisfy the published entry preparation.

A poor financial match depends on part-time work to cover the published tuition and living plan. Work rights don’t turn uncertain income into funds available before enrolment, residence processing or the first rent payment.

MSc Systems, Learning and Control connects control systems with Control Systems; robot learning gives MSc Systems, Learning and Control a second lens, while automation gives Robot Learning a practical test; A control engineer goal makes control systems important; A robotics engineer goal makes robot learning important; The value of MSc Systems, Learning and Control lies in choosing that emphasis deliberately and carrying it through assessed work.

MSc Systems, Learning and Control connects robot learning with Robot Learning; automation gives MSc Systems, Learning and Control a second lens, while electromobility gives Automation a practical test; A robotics engineer goal makes robot learning important; A autonomous-systems developer goal makes automation important; The value of MSc Systems, Learning and Control lies in choosing that emphasis deliberately and carrying it through assessed work.

MSc Systems, Learning and Control connects automation with Automation; electromobility gives MSc Systems, Learning and Control a second lens, while control systems gives Electromobility a practical test; A autonomous-systems developer goal makes automation important; A control engineer goal makes electromobility important; The value of MSc Systems, Learning and Control lies in choosing that emphasis deliberately and carrying it through assessed work.

MSc Systems, Learning and Control connects electromobility with Electromobility; control systems gives MSc Systems, Learning and Control a second lens, while robot learning gives Control Systems a practical test; A control engineer goal makes electromobility important; A robotics engineer goal makes control systems important; The value of MSc Systems, Learning and Control lies in choosing that emphasis deliberately and carrying it through assessed work.

MSc Systems, Learning and Control connects control systems with Control Systems; robot learning gives MSc Systems, Learning and Control a second lens, while automation gives Robot Learning a practical test; A robotics engineer goal makes control systems important; A autonomous-systems developer goal makes robot learning important; The value of MSc Systems, Learning and Control lies in choosing that emphasis deliberately and carrying it through assessed work.

MSc Systems, Learning and Control connects robot learning with Robot Learning; automation gives MSc Systems, Learning and Control a second lens, while electromobility gives Automation a practical test; A autonomous-systems developer goal makes robot learning important; A control engineer goal makes automation important; The value of MSc Systems, Learning and Control lies in choosing that emphasis deliberately and carrying it through assessed work.

MSc Systems, Learning and Control evidence for control systems can sit in a transcript module; MSc Systems, Learning and Control evidence for robot learning can sit in a project report; MSc Systems, Learning and Control evidence for automation can sit in a thesis summary; The Control Systems route makes those details relevant, and Robot Learning may make a different combination relevant; The submitted descriptions should reveal that distinction.

MSc Systems, Learning and Control evidence for robot learning can sit in a transcript module; MSc Systems, Learning and Control evidence for automation can sit in a project report; MSc Systems, Learning and Control evidence for electromobility can sit in a thesis summary; The Robot Learning route makes those details relevant, and Automation may make a different combination relevant; The submitted descriptions should reveal that distinction.

MSc Systems, Learning and Control evidence for automation can sit in a transcript module; MSc Systems, Learning and Control evidence for electromobility can sit in a project report; MSc Systems, Learning and Control evidence for control systems can sit in a thesis summary; The Automation route makes those details relevant, and Electromobility may make a different combination relevant; The submitted descriptions should reveal that distinction.

MSc Systems, Learning and Control evidence for electromobility can sit in a transcript module; MSc Systems, Learning and Control evidence for control systems can sit in a project report; MSc Systems, Learning and Control evidence for robot learning can sit in a thesis summary; The Electromobility route makes those details relevant, and Control Systems may make a different combination relevant; The submitted descriptions should reveal that distinction.

MSc Systems, Learning and Control evidence for control systems can sit in a transcript module; MSc Systems, Learning and Control evidence for robot learning can sit in a project report; MSc Systems, Learning and Control evidence for automation can sit in a thesis summary; The Control Systems route makes those details relevant, and Robot Learning may make a different combination relevant; The submitted descriptions should reveal that distinction.

MSc Systems, Learning and Control evidence for robot learning can sit in a transcript module; MSc Systems, Learning and Control evidence for automation can sit in a project report; MSc Systems, Learning and Control evidence for electromobility can sit in a thesis summary; The Robot Learning route makes those details relevant, and Automation may make a different combination relevant; The submitted descriptions should reveal that distinction.

MSc Systems, Learning and Control can turn control systems into a control engineer artefact; MSc Systems, Learning and Control can turn robot learning into a robotics engineer method; Control Systems supplies one context, and Robot Learning supplies another; The graduate claim is strongest when automation links context to result; It is weakest when MSc Systems, Learning and Control appears only as an award name without inspectable work.

MSc Systems, Learning and Control can turn robot learning into a robotics engineer artefact; MSc Systems, Learning and Control can turn automation into a autonomous-systems developer method; Robot Learning supplies one context, and Automation supplies another; The graduate claim is strongest when electromobility links context to result; It is weakest when MSc Systems, Learning and Control appears only as an award name without inspectable work.

MSc Systems, Learning and Control can turn automation into a autonomous-systems developer artefact; MSc Systems, Learning and Control can turn electromobility into a control engineer method; Automation supplies one context, and Electromobility supplies another; The graduate claim is strongest when control systems links context to result; It is weakest when MSc Systems, Learning and Control appears only as an award name without inspectable work.

MSc Systems, Learning and Control can turn electromobility into a control engineer artefact; MSc Systems, Learning and Control can turn control systems into a robotics engineer method; Electromobility supplies one context, and Control Systems supplies another; The graduate claim is strongest when robot learning links context to result; It is weakest when MSc Systems, Learning and Control appears only as an award name without inspectable work.

MSc Systems, Learning and Control can turn control systems into a robotics engineer artefact; MSc Systems, Learning and Control can turn robot learning into a autonomous-systems developer method; Control Systems supplies one context, and Robot Learning supplies another; The graduate claim is strongest when automation links context to result; It is weakest when MSc Systems, Learning and Control appears only as an award name without inspectable work.

MSc Systems, Learning and Control can turn robot learning into a autonomous-systems developer artefact; MSc Systems, Learning and Control can turn automation into a control engineer method; Robot Learning supplies one context, and Automation supplies another; The graduate claim is strongest when electromobility links context to result; It is weakest when MSc Systems, Learning and Control appears only as an award name without inspectable work.

A MSc Systems, Learning and Control match recognises control systems from prior study and wants robot learning at greater depth; A MSc Systems, Learning and Control uncertainty appears when automation has never been assessed; A Control Systems preference supports a control engineer direction, whereas Robot Learning may support robotics engineer; This programme fit depends on which combination the applicant can enter and complete credibly.

A MSc Systems, Learning and Control match recognises robot learning from prior study and wants automation at greater depth; A MSc Systems, Learning and Control uncertainty appears when electromobility has never been assessed; A Robot Learning preference supports a robotics engineer direction, whereas Automation may support autonomous-systems developer; This programme fit depends on which combination the applicant can enter and complete credibly.

A MSc Systems, Learning and Control match recognises automation from prior study and wants electromobility at greater depth; A MSc Systems, Learning and Control uncertainty appears when control systems has never been assessed; A Automation preference supports a autonomous-systems developer direction, whereas Electromobility may support control engineer; This programme fit depends on which combination the applicant can enter and complete credibly.

A MSc Systems, Learning and Control match recognises electromobility from prior study and wants control systems at greater depth; A MSc Systems, Learning and Control uncertainty appears when robot learning has never been assessed; A Electromobility preference supports a control engineer direction, whereas Control Systems may support robotics engineer; This programme fit depends on which combination the applicant can enter and complete credibly.

A MSc Systems, Learning and Control match recognises control systems from prior study and wants robot learning at greater depth; A MSc Systems, Learning and Control uncertainty appears when automation has never been assessed; A Control Systems preference supports a robotics engineer direction, whereas Robot Learning may support autonomous-systems developer; This programme fit depends on which combination the applicant can enter and complete credibly.

A MSc Systems, Learning and Control match recognises robot learning from prior study and wants automation at greater depth; A MSc Systems, Learning and Control uncertainty appears when electromobility has never been assessed; A Robot Learning preference supports a autonomous-systems developer direction, whereas Automation may support control engineer; This programme fit depends on which combination the applicant can enter and complete credibly.

Advertisements

What does the Chalmers MSc Systems, Learning and Control curriculum contain?

The official 2027 programme page confirms a 120-ECTS structure with the published routes below, a common flexibility window and a final thesis. Chalmers has not yet posted a complete module-by-module table for every new 2027 specialisation, so the page doesn’t invent course titles or credit splits that aren’t published.

ComponentECTSNotes
Control SystemsPublished focus
Robot LearningPublished focus
AutomationPublished focus
ElectromobilityPublished focus
Interdisciplinary project courseProgramme componentShared 2027 portfolio requirement
Flexibility windowYear 2Electives, minor or exchange
Master's thesisFinal componentResearch or industry-linked degree project
Total120

The note “Named on the programme page” applies to 4 components in this table.

  • Complete 120 ECTS in the full-time programme
  • Follow one coherent specialisation or approved course plan
  • Complete the published thesis or final project requirement
  • Check prerequisite chains before choosing advanced electives
  • Confirm the live timetable before fixing the semester sequence
  • Keep the thesis topic aligned with the chosen specialisation
  • Use elective space to deepen one defensible role direction
  • Reserve enough credits and calendar time for the final project
  • Document any faculty-approved departure from the standard plan
  • Recheck the programme structure before enrolment because offerings can change
  • Keep the approved course plan with the application and enrolment records
  • Review the final credit total before confirming module registration

The curriculum should read as a sequence from control systems into robot learning and the final project. Elective freedom is useful only when the chosen set supports one defensible direction in automation, control, robotics, learning systems and electromobility.

Term availability and prerequisite chains can limit the apparent menu. The programme structure is the reliable scope, while the live timetable decides when an individual elective can actually be taken within 24 months.

Should an Indian applicant shortlist the Chalmers MSc Systems, Learning and Control?

Shortlist it when the bachelor transcript already supports the published programme prerequisites and the intended work genuinely needs automation, control, robotics, learning systems and electromobility. Chalmers doesn’t use a minimum CGPA cut-off, but eligible applicants still compete for limited places, so meeting the subject floor is necessary rather than sufficient.

The practical trade is depth in automation, control, robotics, learning systems and electromobility against 24 months of tuition and living costs. The value isn't in covering every published option; it comes from aligning specialisation, project and thesis with a credible next role.

Two things are genuinely hard here. Chalmers checks passed subject content rather than relying on the degree title, and the complete application must be in by 15 January. This isn't a sound shortlist for an applicant wanting applied AI without dynamics, signals or control theory.

Key takeaways
  • MSc Systems, Learning and Control is a full-time, two-year programme carrying 120 ECTS.
  • The 2027/28 tuition is SEK 380,000, paid across four semesters.
  • The full planning total is SEK 775,040, about INR 74.77 lakh, before flights and housing deposits.
  • The autumn 2027 application closes on 15 January, with documents and the fee due by 1 February.
  • The English test route requires IELTS Academic 6.5 overall with no section below 5.5; GRE and GMAT aren't listed.
  • Chalmers publishes no placement-rate or starting-salary series for the new MSc Systems, Learning and Control cohort.
Advertisements

Frequently asked questions

How much is the Chalmers MSc Systems, Learning and Control for Indian students?

The full two-year planning total is SEK 775,040, about INR 74.77 lakh. It includes the published 2027/28 tuition, 24 months at the midpoint of Chalmers' living-cost range, the SEK 900 national application fee and the SEK 1,500 study-permit fee. Flights, housing deposits, furnishings and exchange spreads remain extra.

What is the deadline for the Chalmers MSc Systems, Learning and Control?

Submit and rank the autumn 2027 master's application by 15 January 2027. The SEK 900 application fee, proof of fee exemption and supporting documents are due by 1 February. Chalmers publishes one autumn start for this English-taught programme, so an Indian applicant should not plan around a spring intake.

Is GRE or GMAT required for the Chalmers MSc Systems, Learning and Control?

Neither GRE nor GMAT appears in the published requirements for MSc Systems, Learning and Control. Assessment instead turns on the recognised bachelor, passed programme prerequisites, English evidence and the overall strength of the completed application. A high test score can't replace missing study in control systems, robot learning or another named subject.

What IELTS score is required for the Chalmers MSc Systems, Learning and Control?

Chalmers requires English 6 or English Level 2. The IELTS Academic route is 6.5 overall with no section below 5.5. Some Indian CBSE, CISCE and English-medium Class XII evidence can meet the national English rule, but the certificate must satisfy the exact University Admissions documentation conditions.

Is the Chalmers MSc Systems, Learning and Control full time?

Yes. This page covers the English-taught, daytime, full-time programme in Gothenburg. It lasts two years and carries 120 ECTS. Specialisations and the flexibility window remain within one official course, so they are choices inside the degree rather than separate programme awards or separate Nbyula pages.

Can an Indian student stay in Sweden after the Chalmers MSc Systems, Learning and Control?

A graduate who completes the programme can apply before the study permit expires for a permit to look for work or explore a business. The permit can last up to one year and requires maintenance funds and health-insurance evidence. It doesn't guarantee employment, a work permit or permanent residence.

Sources

These sources support the programme, admission, cost, experience and immigration information used on this page.

Sources checked on September 29, 2026. The next intake covered here is September 2027; applications close 15 January 2027.

More programmes

MSc Artificial IntelligenceChalmers University of Technology24 months ยท 120 ECTSMSc Computer ScienceChalmers University of Technology24 months ยท 120 ECTSMSc Software EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Mathematics, Statistics and Data ScienceChalmers University of Technology24 months ยท 120 ECTSMSc Computing SystemsChalmers University of Technology24 months ยท 120 ECTSMSc Electrical and Electronics EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Biomedical EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc BiotechnologyChalmers University of Technology24 months ยท 120 ECTSMSc Mobility EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Energy SystemsChalmers University of Technology24 months ยท 120 ECTSMSc Electric Power EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Computational MechanicsChalmers University of Technology24 months ยท 120 ECTSMSc Product DevelopmentChalmers University of Technology24 months ยท 120 ECTSMSc Production EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Materials Science and EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Technology and Innovation ManagementChalmers University of Technology24 months ยท 120 ECTSMSc Operations ManagementChalmers University of Technology24 months ยท 120 ECTSMSc Entrepreneurship and Business DesignChalmers University of Technology24 months ยท 120 ECTSMSc Human-Centred Design and EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Environmental and Infrastructure EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Structural and Geotechnical EngineeringChalmers University of Technology24 months ยท 120 ECTSMSc Architectural DesignChalmers University of Technology24 months ยท 120 ECTSMSc Industrial EcologyChalmers University of Technology24 months ยท 120 ECTSMSc Design and Construction ManagementChalmers University of Technology24 months ยท 120 ECTS

Need assistance with this programme?

Get free help

Edwin Selvaraj Avatar

More to read

  • ,

    BA Political Science at the University of Kassel for Indian applicants: Winter 2027/28 costs in INR, the 15 July 2027 deadline, entry…

    ยท

  • ,

    BA Educational Science with Integrated Sustainability Studies at Kassel for Indian applicants: Winter 2027/28 costs in INR, entry rules, APS and English…

    ยท

  • ,

    BA Social Work at the University of Kassel for Indian applicants: Winter 2027/28 costs in INR, the 15 July 2027 deadline, entry…

    ยท