Ghent MSc Electromechanical Engineering (Control and Automation)

What is Ghent MSc Electromechanical Engineering (Control and Automation)?

Ghent MSc Electromechanical Engineering (Control and Automation) is an English-taught, full-time 2 years master’s carrying 120 ECTS. The latest stated non-EEA tuition is EUR 7,079.40 for 2026/27. A full-course plan using EUR 1,500 a month for living costs reaches EUR 50,158.80, or INR 54.78 lakh, before flights and refundable deposits.

The route moves from Controlled Electrical Drives and Control Systems through Automation into Master’s Dissertation. This guide is written for September 2027 entry. Ghent has stated the 1 April visa-candidate deadline, but 2027/28 tuition is not yet stated, so the cost table keeps the latest official fee visibly year-stamped.

A concrete reading of MSc Electromechanical Engineering (Control and Automation) starts with Controlled Electrical Drives, then tests how Turbomachines changes the type of problem a postgraduate can handle. In MSc Electromechanical Engineering (Control and Automation), Displacement Pumps, Compressors and IC module is not an isolated label: it sits beside ICT and Mechatronics and must contribute to the route’s technical centre.

The stated MSc Electromechanical Engineering (Control and Automation) menu also places Mechanical Vibrations near Linear Systems. That pairing helps a candidate distinguish this route from a generic master’s with a similar title. Open both course descriptions and ask whether their assessments build convincingly towards the final project.

Seen through academic continuity, MSc Electromechanical Engineering (Control and Automation) places Controlled Electrical Drives beside Mechanical Vibrations. The official description of Integrated Portfolio shows whether that combination demands reading, calculation, design or investigation, and how the whole route develops its technical and analytical centre.

Seen through portfolio value, MSc Electromechanical Engineering (Control and Automation) places Linear Systems beside Integrated Portfolio. The official description of Sustainable Use of Materials: Plastics module shows whether that combination demands reading, calculation, design or investigation, and how the whole route develops its technical and analytical centre.

Seen through weekly study pattern, MSc Electromechanical Engineering (Control and Automation) places Integrated Portfolio beside Sustainable Use of Materials: Plastics module. The official description of History and Philosophy of Sciences shows whether that combination demands reading, calculation, design or investigation, and how the whole route develops its technical and analytical centre.

How much does Ghent MSc Electromechanical Engineering (Control and Automation) cost?

The full 2 years planning total is EUR 50,158.80, about INR 54.78 lakh. It combines the latest published 2026/27 tuition with EUR 36,000.00 for 24 months. It is not a frozen 2027/28 invoice. This estimate isn’t a price guarantee, so keep an arrival reserve outside it.

Ghent's 2026/27 information sheet estimates EUR 1,200 to EUR 1,800 a month. This page uses the midpoint; the immigration solvency floor is not a complete lifestyle budget. Converted at EUR 1 = INR 109.2095, the ECB reference rate for September 28, 2026. Tuition, living costs and the exchange rate can change.

The university’s 2026/27 international information sheet places total monthly spending at EUR 1,200 to EUR 1,800. The model uses EUR 1,500. Shared housing can pull the total down, while a private studio and higher energy costs can push it towards the upper end.

The annual tuition line is EUR 7,079.40. For a 2 years route, the table repeats that current annual rate as a transparent planning assumption because the second-year invoice has not been published. That treatment keeps a future estimate separate from an official fee.

Flights, a refundable housing deposit, furnishing, bank exchange spreads and personal travel remain outside the total because no single official amount applies to every student. Those costs need a separate arrival reserve.

Can an Indian candidate meet Ghent MSc Electromechanical Engineering (Control and Automation) entry rules?

Ghent assesses whether the foreign degree provides competences equivalent to the Flemish degree that gives access. The course’s academic centre requires an electromechanical, electrical or mechanical engineering degree with control theory, dynamics, mathematics and programming. English B2 is the standard unless the course publishes a higher score.

The academic comparison is course-defined. Ghent’s central admissions team checks the diploma and authenticity before the faculty decides whether the earlier syllabus supports Controlled Electrical Drives, Control Systems and the later Automation work.

A valuable subject map lists every applicable bachelor module, its credits, the official description and one assessed output. That map makes motion control and feedback observable without asking the assessor to infer content from a familiar degree name.

For this course, the most persuasive preparation points towards Master’s Dissertation. The example need not copy a Ghent project. It should show that the candidate can frame a bounded problem, choose an appropriate method and explain the finding’s limit.

The dossier also needs a clean distinction between official records and explanation. The transcript proves credit, the syllabus explains ambiguous subjects and the motivation statement explains why the next academic step is coherent.

For transcript mapping, a MSc Electromechanical Engineering (Control and Automation) candidate can use Controlled Electrical Drives, Computer Control of Industrial Processes and Modelling and Simulation of Dynamical Systems as three distinct checkpoints. Earlier study does not need identical Ghent names, but the submitted syllabus should reveal comparable depth, methods and assessment rather than relying on a general departmental label.

A credible MSc Electromechanical Engineering (Control and Automation) dossier explains preparation for Industry Internship Engineering and Architecture without pretending that interest alone equals prerequisite knowledge. Evidence may come from credited study, a supervised project or applicable research, provided it makes the methods behind Integrated Portfolio observable enough for an academic assessor to evaluate.

When documenting method depth for MSc Electromechanical Engineering (Control and Automation), begin with earlier work comparable to Turbomachines. A transcript map can then connect Linear Systems to its assessment evidence, while a syllabus makes the methods needed for Integrated Portfolio observable to the faculty assessor.

When documenting research readiness for MSc Electromechanical Engineering (Control and Automation), begin with earlier work comparable to Computer Control of Industrial Processes. A transcript map can then connect Integrated Portfolio to its assessment evidence, while a syllabus makes the methods needed for Technology and Environment observable to the faculty assessor.

When documenting final-project scope for MSc Electromechanical Engineering (Control and Automation), begin with earlier work comparable to Safety of Electrical and Mechanical Installations. A transcript map can then connect Technology and Environment to its assessment evidence, while a syllabus makes the methods needed for The Information Society and ICT observable to the faculty assessor.

A familiar degree title doesn’t settle entry to MSc Electromechanical Engineering (Control and Automation); the credited content still has to demonstrate an electromechanical, electrical or mechanical engineering degree with control theory, dynamics, mathematics and programming.

Four checks that can reject an Indian dossier

1. The transcript must expose Controlled Electrical Drives

   A general degree title does not prove motion control. Credits, course descriptions and assessed work show whether the baseline is deep enough for MSc Electromechanical Engineering (Control and Automation).

2. The methods behind Control Systems matter

   Course titles vary across Indian universities. An official syllabus showing feedback, the assessment and the credit load gives the faculty evidence that a short transcript label cannot provide.

3. Qualification Check belongs before submission

   Ghent states that a complete application includes a verified academic degree. Starting the portal without finishing verification does not protect the 1 April deadline.

4. An English-medium degree is not an automatic waiver

   Use the stated exemption list and the course brochure. Where no exemption applies, the university’s B2 table accepts IELTS Academic 6.0, while a few courses publish a higher score.

How should an Indian applicant apply for Ghent MSc Electromechanical Engineering (Control and Automation)?

The application uses Ghent’s online admission process, Qualification Check and a faculty review. A visa applicant must submit a complete file before 1 April. Degree verification is part of completeness. Don’t leave degree verification or English evidence to the final month.

Ghent online application, completed academic verification and faculty assessment.

The allowances are Nbyula planning estimates, not processing times published by Ghent University.

The admissions desk first checks the general requirements and authenticity. The faculty then assesses whether the prior curriculum is equivalent to the preparation expected for the chosen programme. A portal status and an academic admission decision are therefore not the same event.

A six-week allowance for English results and a three-week allowance for academic verification protect the 1 April endpoint. Applicants who already hold accepted proof can use that time to collect official syllabi and grading information.

The retained application archive should contain the final upload set, Qualification Check result and Ghent messages. It matters if the faculty asks for clarification about Controlled Electrical Drives or if an old document remains visible in the portal.

What jobs can follow Ghent MSc Electromechanical Engineering (Control and Automation)?

The reported degree structure and career context support directions such as control engineer, automation engineer, robotics engineer or systems integrator. These career directions don’t come with promised placements. Ghent publishes no audited placement or starting-salary series for this formal course. The distinction is deliberate. Flemish guidance says the orientation year doesn’t guarantee employment.

Eligible non-EEA graduates can apply for a 12-month Belgian orientation year to seek work or start a business. It is residence time, not a placement or salary guarantee.

The most persuasive graduate evidence is a controlled-system implementation with stability evidence, disturbance tests and actuator constraints. That artefact connects the degree’s subject to a decision an employer or doctoral supervisor recognises. It also exposes boundaries, which prevents familiarity with one method from being presented as mastery of the whole academic area.

Controlled Electrical Drives can supply the first portfolio component through motion control. Control Systems then adds feedback, producing a different kind of evidence. The progression becomes actionable when Automation combines both in work that can be explained without relying on the course title.

The final Master’s Dissertation should narrow the graduate specialism. A topic spanning the whole subject would be too wide-ranging for a defensible outcome. One bounded analytical problem, credible data or authority, a transparent method and an honest limitation produce a clearer signal for the occupations listed above.

Ghent’s name does not remove language and regulation from the labour market. English supports international and research-facing occupation-facing paths, while many local client, clinical, policy or legal positions also depend on Belgian or occupation-facing recognition. Occupational rules must be assessed independently from the academic MSc Electromechanical Engineering (Control and Automation) award.

The Belgian orientation year lasts one year and is available under stated conditions after an eligible Belgian degree. During that permit, work is free of the ordinary graduate postgraduate-hour restriction. Eligibility for the permit and suitability for a delimited occupation-facing path remain alternative decisions.

Ghent’s orientation-year guidance gives eligible non-EEA graduates a 12-month residence period and unlimited labour-market access once the required interim document is issued. The permit creates search time. It does not remove Dutch-language needs, occupational recognition or employer selection.

The strongest outcome story for MSc Electromechanical Engineering (Control and Automation) links Integrated Portfolio to Safety of Electrical and Mechanical Installations and then to a piece of inspectable work. That sequence supports positions such as control engineer, automation engineer, robotics engineer or systems integrator; it does not promise that a course title by itself secures one of those jobs.

During MSc Electromechanical Engineering (Control and Automation), Sustainable Energy and Rational Use module can supply one kind of evidence while Sustainable Use of Materials: Metals supplies a second. A postgraduate should preserve the brief, method, finding and limitations from both, since the contrast shows range more clearly than a transcript line or an unsupported skills list.

Evidence from Displacement Pumps, Compressors and IC module gives a MSc Electromechanical Engineering (Control and Automation) graduate one inspectable finding. Work in Computer Control of Industrial Processes can test a different part of assessment evidence; combining both with Safety of Electrical and Mechanical Installations makes the eventual conclusion about control engineer, automation engineer, robotics engineer or systems integrator more defined without turning it into a job promise.

Evidence from Modelling and Simulation of Dynamical Systems gives a MSc Electromechanical Engineering (Control and Automation) graduate one inspectable finding. Work in Safety of Electrical and Mechanical Installations can test a different part of occupational direction; combining both with Water and Air Quality Management makes the eventual conclusion about control engineer, automation engineer, robotics engineer or systems integrator more defined without turning it into a job promise.

Evidence from Sustainable Energy and Rational Use module gives a MSc Electromechanical Engineering (Control and Automation) graduate one inspectable finding. Work in Water and Air Quality Management can test a different part of earlier-learning proof; combining both with Introduction to Psychology makes the eventual conclusion about control engineer, automation engineer, robotics engineer or systems integrator more defined without turning it into a job promise.

How is Ghent ranked for the field behind MSc Electromechanical Engineering (Control and Automation)?

Ghent University is 98th in ARWU 2026 and 150th in QS 2027. Those are institution-wide signals. They do not decide admission, course fit or employment for this exact master’s. The NVAO institutional record is separate quality-assurance evidence, not a course ranking.

Who is Ghent MSc Electromechanical Engineering (Control and Automation) for?

The best subject match already holds the academic preparation for Controlled Electrical Drives, wants to connect feedback with industrial systems and can fund 2 years without depending on wages that can’t be guaranteed. The comparison below identifies the negative case clearly. Use it before committing.

Day-to-day subject match is explicit in the repeated task, not the degree label. MSc Electromechanical Engineering (Control and Automation) repeatedly combines motion control, feedback and industrial systems. Enjoying one theme while avoiding the others creates friction long before the thesis begins.

The financial subject match is EUR 50,158.8 in the planning model, about INR 54.78 lakh. Belgian rules permit limited graduate postgraduate work under conditions, but future wages cannot serve as certain pre-arrival funding. The academic timetable for Automation also remains the first contention on the graduate postgraduate’s week.

The occupation-facing subject match depends on what follows the award. A person targeting the listed occupations can use Master’s Dissertation to show an appropriate method and domain. A person targeting a regulated title needs an alternative recognition route, language evidence or occupation-facing training where that occupation requires it.

The final decision joins three independent answers: academic admissibility, affordability for 24 months and appetite for independent research. A positive answer in only one column does not make MSc Electromechanical Engineering (Control and Automation) a safe application, regardless of Ghent University’s broader reputation.

A graduate postgraduate who enjoys Controlled Electrical Drives usually accepts returning to motion control. That preference matters since MSc Electromechanical Engineering (Control and Automation) does not leave the entry base behind after one introductory block. It reappears when Automation raises a harder analytical problem and when Master’s Dissertation demands the graduate postgraduate’s own position. Persistent interest in that method is a more reliable subject match signal than wide interest in the subject area.

The day-to-day test for MSc Electromechanical Engineering (Control and Automation) is whether work in Turbomachines and Industry Internship Engineering and Architecture sounds engaging after the novelty wears off. Someone drawn only to Mechanical Vibrations may still find the course poorly matched when the compulsory analytical, technical or research tasks recur each week.

The clearest match warning for MSc Electromechanical Engineering (Control and Automation) comes from recurring work around Computer Control of Industrial Processes, Safety of Electrical and Mechanical Installations and Sustainable Use of Materials: Plastics module. A postgraduate who would consistently avoid those tasks can test that concern before committing tuition and relocation costs.

Daily work in ICT and Mechatronics offers a practical technical workload test for MSc Electromechanical Engineering (Control and Automation). If Modelling and Simulation of Dynamical Systems sounds valuable but the methods behind Sustainable Energy and Rational Use module sound persistently unappealing, the route may create a poor match even when its general subject and location look attractive.

Daily work in Industry Internship Engineering and Architecture offers a practical subject breadth test for MSc Electromechanical Engineering (Control and Automation). If Sustainable Energy and Rational Use module sounds valuable but the methods behind Biosystems sound persistently unappealing, the route may create a poor match even when its general subject and location look attractive.

Daily work in Sustainable Use of Materials: Metals offers a practical career relevance test for MSc Electromechanical Engineering (Control and Automation). If Biosystems sounds valuable but the methods behind Coaching and Diversity sound persistently unappealing, the route may create a poor match even when its general subject and location look attractive.

This isn’t a sensible MSc Electromechanical Engineering (Control and Automation) choice when recurring work in Controlled Electrical Drives feels like an obstacle rather than a skill the candidate wants to practise.

What does Ghent MSc Electromechanical Engineering (Control and Automation) cover?

The 2026/27 full-time curriculum carries 120 ECTS across 24 months. The table lists each distinct course published across the programme’s compulsory, major and elective groups once. Students complete only the groups required by their route. The European Commission’s ECTS guide treats 60 credits as one full-time academic year.

• Complete 120 ECTS in the full-time route
• Follow the compulsory group and one approved major where the programme requires it
• Treat the catalogue table as a menu of published options, not a requirement to take every row

Controlled Electrical Drives and Control Systems answer different preparation questions. The first develops motion control, while the second centres on feedback. Their combination gives MSc Electromechanical Engineering (Control and Automation) more definition than a loose collection of electives with no shared research problem.

Automation is the point at which the profile becomes personal. A choice within industrial systems should strengthen the intended question instead of duplicating introductory work. Timetable fit and prerequisites remain practical limits on that choice.

Master’s Dissertation is not an isolated final requirement. Its strongest version reuses a method, problem or evidence base developed earlier and then makes the claim harder. That continuity gives a supervisor a feasible project and gives the graduate a coherent account of the degree.

A curriculum plan for MSc Electromechanical Engineering (Control and Automation) is therefore a chain: foundation, specialised evidence, independent work and a bounded conclusion. Changing direction is possible, but a late collection of unrelated subjects weakens both the thesis setup and the explanation offered to a future employer.

Should an Indian admission prospect shortlist Ghent MSc Electromechanical Engineering (Control and Automation)?

The central trade-off is whether pre-existing study already supports the reported academic academic area. The degree becomes a substantive choice when the intended work in control systems, automation, electrical drives, robotics and industrial dynamics needs both Controlled Electrical Drives and Master’s Dissertation. Cost and university reputation cannot repair a subject mismatch.

The worthwhile exchange in MSc Electromechanical Engineering (Control and Automation) is depth in control systems, automation, electrical drives, robotics and industrial dynamics for 2 years of full-time work. Controlled Electrical Drives supplies motion control, whereas Automation moves the graduate specialism toward industrial systems. A coherent choice connects those blocks instead of selecting the award for the Ghent name alone.

The course is a poor match for a management-focused admission prospect who wants automation without differential equations, control theory or hardware. That mismatch would affect admission, classroom performance or the target occupation-facing path even if the admission prospect could fund the degree. The award is academic; any regulated occupation-facing right remains an alternative matter where the target occupation-facing path requires one.

Sources

These sources support the programme, admission, cost, experience and immigration information used on this page.

Sources checked on September 29, 2026. The next intake covered here is September 2027; visa applicant deadline 1 April 2027.