TU Chemnitz MSc Automation, Robotics and Control

What is the TU Chemnitz MSc Automation, Robotics and Control?

TU Chemnitz MSc Automation, Robotics and Control is a four-term, 120 ECTS full-time master’s. Its opening block is control and modelling foundations at 25 ECTS, followed by subject choice and independent work. TU Chemnitz publishes no ordinary tuition for a standard consecutive degree.

This page describes the Winter 2027/28 intake and its 15 July 2027 international deadline. Before flights and housing deposits, current assumptions put the complete planning envelope at INR 27.63 lakh. The model uses the winter 2026/27 term contribution because the intake-year amount is not yet published, while the academic reading starts with dynamic-system modelling and control theory rather than treating the degree title as the whole curriculum. Control and modelling foundations contributes 25 ECTS to dynamic systems and optimisation in MSc Automation, Robotics and Control; this places dynamic-system modelling inside a defined assessed block rather than leaving it as a catalogue keyword. Automation and sensors contributes 20 ECTS to industrial and intelligent systems in MSc Automation, Robotics and Control; this places control theory inside a defined assessed block rather than leaving it as a catalogue keyword. Robotics specialisation contributes 20 ECTS to mobile and interactive robots in MSc Automation, Robotics and Control; this places intelligent sensors inside a defined assessed block rather than leaving it as a catalogue keyword. Projects, electives and German contributes 25 ECTS to practice and language development in MSc Automation, Robotics and Control; this places mobile robotics inside a defined assessed block rather than leaving it as a catalogue keyword. Master’s thesis contributes 30 ECTS to final research in MSc Automation, Robotics and Control; this places automation inside a defined assessed block rather than leaving it as a catalogue keyword.

How much does TU Chemnitz MSc Automation, Robotics and Control cost?

The two-year planning total is about INR 27.63 lakh. TU Chemnitz’s current fee page confirms no ordinary tuition for this consecutive master’s. The budget still includes four semester contributions, 24 months of living costs, APS, the application route and the visa; exchange-rate movement can change the final INR amount.

The blocked-account balance remains the student’s money and is already represented within the 24-month living-cost plan. Converted at EUR 1 = INR 110.0485, the ECB reference rate on 1 September 2026. The APS fee remains in INR. Future semester fees, flights, deposits and exchange spreads can change or remain extra.

“Blocked bank account (“Sperrkonto”) in Germany with sufficient funds to cover the first year of studies”German Missions in India, study visa funding rule

The German Missions in India funding rule supports the blocked-account figure used here. The dated rupee conversion and its European Central Bank reference series are stated directly in the cost note above.

TU Chemnitz publishes EUR 970 as its itemised monthly living estimate. The 24-month row uses that amount rather than the lower immigration minimum because rent, insurance, food, study materials and ordinary personal costs continue throughout the degree.

The EUR 341.40 winter 2026/27 semester contribution includes student services, the student body, the culture ticket and the Germany-wide semester transport ticket. The calculation holds it constant across four terms only for planning.

The current APS verification fee is INR 18,000. The dMAT adds EUR 150 where the applicant’s previous degree is in an affected engineering or business field, and the result becomes part of APS rather than replacing it.

The application uses uni-assist. The plan includes the current EUR 75 uni-assist fee for a first application.

Can an Indian applicant meet TU Chemnitz MSc Automation, Robotics and Control entry rules?

Admission starts with a relevant bachelor’s record that meets the published subject-equivalence rule for MSc Automation, Robotics and Control. Applicants must also satisfy the stated language evidence. For Indian graduates, APS belongs in the submission chain; the uni-assist route and 15 July 2027 deadline remain separate conditions, not substitutes for academic eligibility.

The official course profile defines the academic match as a suitable engineering degree with foundations in mathematics, control, automation, robotics, electrical engineering or mechatronics. Include unit descriptions wherever a title does not make the relevant preparation clear.

The programme is listed without restricted admission, but every special entry condition remains binding. A complete file can still fail when the transcript or language documentation does not meet the stated rule.

No GRE or GMAT rule is published. An aptitude-test score cannot repair missing discipline content, language proof, APS or incomplete application documents.

For MSc Automation, Robotics and Control, begin the previous-degree review with control and modelling foundations and then test readiness for robotics specialisation. The file should show a progression from bachelor’s foundations to independent work.

A useful unit map names the bachelor’s unit, local credit value, workload, syllabus topics and assessment. That documentation matters for engineering preparation, where the programme expects mathematics, systems and control foundations.

Readiness for control and modelling foundations should connect mathematics, systems and control foundations to dynamic systems and optimisation; its 25 ECTS share gives the MSc Automation, Robotics and Control reviewer a concrete transcript comparison. Readiness for automation and sensors should connect mathematics, systems and control foundations to industrial and intelligent systems; its 20 ECTS share gives the MSc Automation, Robotics and Control reviewer a concrete transcript comparison. Readiness for robotics specialisation should connect mathematics, systems and control foundations to mobile and interactive robots; its 20 ECTS share gives the MSc Automation, Robotics and Control reviewer a concrete transcript comparison. Readiness for projects, electives and german should connect mathematics, systems and control foundations to practice and language development; its 25 ECTS share gives the MSc Automation, Robotics and Control reviewer a concrete transcript comparison. Readiness for master’s thesis should connect mathematics, systems and control foundations to final research; its 30 ECTS share gives the MSc Automation, Robotics and Control reviewer a concrete transcript comparison.

Three checks that can reject an Indian file

1. The programme rule outranks the general master’s wording

   The main academic risk is a gap between mathematics, systems and control foundations and the planned work in control and modelling foundations. The faculty reviews content equivalence rather than accepting a broad degree label at face value.

2. Language evidence controls enrolment

   The course is listed as English. The applicable rule is English B2 and German A1 at admission; German develops to at least B2 by graduation; an English webpage or workplace use is not a substitute for an accepted certificate.

3. APS does not replace subject equivalence

   APS India also requires the dMAT for affected engineering or business prior degrees from summer 2027 onward. Neither APS nor dMAT overrides the faculty’s academic decision.

How should an Indian applicant plan the TU Chemnitz MSc Automation, Robotics and Control application?

The academic application uses uni-assist and closes on 15 July 2027 for this intake. An applicant should assemble the transcript, degree evidence and accepted language certificate before submission. APS, university document preparation and visa evidence run on separate timelines because admission, enrolment and immigration assess different parts of the file.

Apply through uni-assist, keep APS and any applicable dMAT moving, submit all programme evidence by 15 July 2027, and retain the document checklist generated by the portal.

The allowances are Nbyula planning estimates, not processing times published by Technische Universität Chemnitz.

Start with programme fit because a broad phrase such as related degree does not establish content equivalence. The faculty’s current study and admission regulation controls the decision.

TU Chemnitz requires international applicants with a foreign bachelor’s degree to use uni-assist for this programme. The complete file, including later documents, must reach the portal by the deadline.

Run language testing and APS alongside transcript preparation. Waiting for an admission result before beginning APS can delay the visa even after the academic decision is positive.

What jobs can follow TU Chemnitz MSc Automation, Robotics and Control?

TU Chemnitz connects MSc Automation, Robotics and Control with automation engineering, robotics, control systems, autonomous machines, sensor systems and industrial R&D. That direction follows from the assessed path between control and modelling foundations and master’s thesis. The university does not publish a course-level placement percentage, employer denominator or salary distribution.

The university publishes academic and career directions, but no audited programme-level job outcome or salary outcome.

The documentation portfolio from MSc Automation, Robotics and Control can be planned around the assessed sequence rather than a generic job list. Work from control and modelling foundations can establish foundations, robotics specialisation can demonstrate applied judgement, and the master’s thesis can supply one sustained piece of independent work. Together those outputs are more defensible for automation engineering, robotics, control systems, autonomous machines, sensor systems and industrial R&D than an uncited claim that graduates are automatically job-ready.

A realistic employment plan for MSc Automation, Robotics and Control also separates course documentation from language and market documentation. The degree moves from control and modelling foundations through robotics specialisation to master’s thesis; it does not publish a hiring quota. Students targeting the listed career directions should use institute projects, discipline-specific electives and thesis supervision to make the relevant capability visible, while treating German workplace ability as a separate investment where the intended role requires it.

For this particular degree, a recruiter can inspect three different outputs: foundation work from control and modelling foundations, applied decisions made through robotics specialisation, and independent research in the master’s thesis. Those are not interchangeable signals. A candidate aiming at automation engineering, robotics, control systems, autonomous machines, sensor systems and industrial R&D should decide which output will become the portfolio centrepiece, then choose supervision and electives that deepen it. The course title alone cannot show whether the graduate can perform that work.

Dynamic-system modelling connects to control and modelling foundations, a 25 ECTS part of the published MSc Automation, Robotics and Control structure. Control theory connects to automation and sensors, a 20 ECTS part of the published MSc Automation, Robotics and Control structure. Intelligent sensors connects to robotics specialisation, a 20 ECTS part of the published MSc Automation, Robotics and Control structure. Mobile robotics connects to projects, electives and german, a 25 ECTS part of the published MSc Automation, Robotics and Control structure. Automation connects to master’s thesis, a 30 ECTS part of the published MSc Automation, Robotics and Control structure. Practice-oriented group projects connects to control and modelling foundations, a 25 ECTS part of the published MSc Automation, Robotics and Control structure.

For work in automation engineering, control and modelling foundations can demonstrate dynamic systems and optimisation; the 25 ECTS contribution provides documentation tied specifically to MSc Automation, Robotics and Control instead of a generic career promise. For work in robotics, automation and sensors can demonstrate industrial and intelligent systems; the 20 ECTS contribution provides documentation tied specifically to MSc Automation, Robotics and Control instead of a generic career promise. For work in control systems, robotics specialisation can demonstrate mobile and interactive robots; the 20 ECTS contribution provides documentation tied specifically to MSc Automation, Robotics and Control instead of a generic career promise. For work in autonomous machines, projects, electives and german can demonstrate practice and language development; the 25 ECTS contribution provides documentation tied specifically to MSc Automation, Robotics and Control instead of a generic career promise. For work in sensor systems, master’s thesis can demonstrate final research; the 30 ECTS contribution provides documentation tied specifically to MSc Automation, Robotics and Control instead of a generic career promise.

Who is TU Chemnitz MSc Automation, Robotics and Control for, and who should avoid it?

A strong MSc Automation, Robotics and Control fit can prove mathematics, systems and control foundations, satisfy the stated instruction-language rule, and explain an interest in automation engineering and robotics. The weaker profile is attracted by the title but cannot map bachelor’s preparation to the assessed blocks.

The first self-check is control and modelling foundations, worth 25 ECTS. A candidate should be able to name earlier study that supports dynamic systems and optimisation before relying on electives to close a foundation gap.

The second test is the transition from robotics specialisation to master’s thesis. That sequence brings dynamic-system modelling and control theory into one study plan, so the electives need a coherent discipline-specific or research direction.

For MSc Automation, Robotics and Control, the explicit documentation hinge is engineering preparation: mathematics, systems and control foundations. The practical pre-application task is to map signals, modelling and engineering modules and identify any missing foundation honestly.

Career fit should also be specific. Automation engineering and robotics are plausible directions, but TU Chemnitz publishes no programme-level job outcome guarantee. Institute work, projects and the thesis need to make the intended capability inspectable.

Finally, compare the academic match with the INR 27.63 lakh plan and the official language-certificate sequence. Low tuition does not rescue a weak transcript match, an unaffordable living plan or documentation that will not be accepted.

A MSc Automation, Robotics and Control self-audit pairs control and modelling foundations (25 ECTS) with earlier proof relevant to dynamic systems and optimisation; someone targeting automation engineering should decide whether this block deepens an existing strength or exposes a foundation gap. A MSc Automation, Robotics and Control self-audit pairs automation and sensors (20 ECTS) with earlier proof relevant to industrial and intelligent systems; someone targeting robotics should decide whether this block deepens an existing strength or exposes a foundation gap. A MSc Automation, Robotics and Control self-audit pairs robotics specialisation (20 ECTS) with earlier proof relevant to mobile and interactive robots; someone targeting control systems should decide whether this block deepens an existing strength or exposes a foundation gap. A MSc Automation, Robotics and Control self-audit pairs projects, electives and german (25 ECTS) with earlier proof relevant to practice and language development; someone targeting autonomous machines should decide whether this block deepens an existing strength or exposes a foundation gap. A MSc Automation, Robotics and Control self-audit pairs master’s thesis (30 ECTS) with earlier proof relevant to final research; someone targeting sensor systems should decide whether this block deepens an existing strength or exposes a foundation gap.

The programme-specific comparison ledger for MSc Automation, Robotics and Control is Control and modelling foundations = 25 ECTS for dynamic systems and optimisation; Automation and sensors = 20 ECTS for industrial and intelligent systems; Robotics specialisation = 20 ECTS for mobile and interactive robots; Projects, electives and German = 25 ECTS for practice and language development; Master’s thesis = 30 ECTS for final research. Read together, those allocations reveal whether the proposed degree extends the candidate’s present academic documentation or asks for a foundation that is not yet there.

What does the 120 ECTS TU Chemnitz MSc Automation, Robotics and Control curriculum contain?

The published structure totals 120 ECTS across taught, elective, project and thesis work. The table below summarises every published credit block and identifies the independent work, so applicants can compare earlier preparation with the assessed path without assuming that every student follows one fixed module list.

• The full-time standard duration is four semesters
• The total award carries 120 ECTS
• The 30 ECTS thesis remains the final research component

The clearest curriculum landmarks are control and modelling foundations and robotics specialisation. Electives should connect those commitments to one explainable profile.

Module availability can change by term. The current handbook and examination regulation control the actual choice, prerequisite sequence and assessment.

Should an Indian applicant shortlist TU Chemnitz MSc Automation, Robotics and Control?

Shortlist MSc Automation, Robotics and Control if the bachelor’s record proves mathematics, systems and control foundations and the planned route through control and modelling foundations is credible. The decision turns on course-level preparation rather than the university name alone. That distinction should control the final shortlist decision for an Indian applicant.

Its strongest value is the progression from control and modelling foundations to master's thesis without ordinary tuition. The tradeoff is a two-year living commitment and an admissions review that expects earlier disciplinary depth. MSc Automation, Robotics and Control doesn't turn that sequence into a guarantee of a. TU Chemnitz hasn't published a programme-level job outcome rate for this course. Low tuition isn't proof of academic fit, robotics specialisation can't replace the entry rule, and the thesis won't repair missing bachelor preparation.

Two things are genuinely hard here. The new programme requires German A1 at admission and development to B2 by graduation even though teaching is in English. Candidates who want an English-only experience should not treat the course language as the whole language commitment. The language hurdle also applies across admission and study, so a student unable to meet the official certificate sequence should not treat low tuition as a reason to apply.

Sources

These sources support the programme, admission, cost, experience and immigration information used on this page.

Sources checked on September 2, 2026. The next intake covered here is Winter 2027/28; apply by 15 July 2027.