University of Lübeck MSc Medical Microtechnology

What is the University of Lübeck MSc Medical Microtechnology?

MSc Medical Microtechnology is a four-semester, 120 ECTS full-time degree focused on medical devices, cleanroom fabrication, multiphysics, optics and international research practice. Admission depends on the prior-degree and language evidence detailed below. The subject mix, practical work and final assessment determine the actual fit.

The selection method is a joint-programme engineering equivalence assessment. The current planning route is uni-assist, then the TH Lübeck portal for Winter 2027/28, and the two-year budget is about INR 27.35 lakh. The main drawback is concrete: The compulsory move to Denmark changes housing and travel costs, while the programme-specific 2027 foreign-degree deadline is not yet published. Career evidence is addressed separately, without an invented placement rate.

The curriculum makes the choice concrete for MSc Medical Microtechnology. Lübeck foundations accounts for 30 ECTS, while SDU microtechnology semester contributes another 30 ECTS. The route then reaches Thesis and colloquium at 30 ECTS, so these credits describe a defined academic sequence rather than a broad subject label.

How much does University of Lübeck MSc Medical Microtechnology cost?

The two-year planning total is EUR 24,916.21, approximately INR 27.35 lakh. It combines 24 months at the university’s EUR 900 estimate, four current semester contributions, any stated first-enrolment charge, the German visa fee and APS, plus a transparent Nbyula allowance for the compulsory Denmark term. Flights and housing deposits remain outside it.

The EUR 11,904 blocked account is the first twelve months of living money and is not added again. VFS charges and provider fees remain outside this total. Euro items use EUR 1 = INR 109.75, the ECB reference rate published on 3 September 2026. The winter 2026/27 contribution is held constant for planning and can change.

“Blocked bank account (“Sperrkonto”) in Germany with sufficient funds to cover the first year of studies”German Missions in India, study visa funding rule

The German Missions in India funding rule supports the blocked-account figure used here. The dated rupee conversion and its European Central Bank reference series are stated directly in the cost note above.

This programme charges no ordinary tuition. Its current semester contribution is EUR 394.30, and later amounts can change.

The university’s EUR 900 monthly estimate covers ordinary living costs. It isn’t a promise that rent, insurance and food will stay within that amount.

APS, translations, travel, insurance differences and a housing deposit create separate cash-flow pressure. Only the APS base fee is included because the other amounts depend on the applicant and provider.

Medical Microtechnology requires semester two in Denmark. The EUR 1,500 mobility row is a Nbyula planning allowance for cross-border travel and a second housing setup, not a university charge; actual rent and deposits may be higher.

Can an Indian applicant meet University of Lübeck MSc Medical Microtechnology entry rules?

Possibly. An Indian applicant needs a 180 ECTS degree in a relevant engineering discipline at German grade 2.5 or better and English B2. The programme also checks engineering route and prior grade, using the transcript, syllabus and named supporting evidence. The table below maps each published condition to a document.

MSc Medical Microtechnology starts with the engineering route review. The evidence must show electrical, computing, mechanical, mechatronics, physical, process or materials engineering, or a comparable degree. Keep the original credits beside every engineering route module, because Lübeck needs content evidence rather than a translated subject title alone.

MSc Medical Microtechnology then separates the prior grade decision. The evidence must show German-equivalent grade 2.5 or better. Treat that prior grade line as cumulative with engineering route, not as an alternative route.

MSc Medical Microtechnology also tests language. The evidence must show English B2. Finish the language evidence before submission; APS verifies the Indian academic records but doesn’t decide this programme-specific academic question.

In the German grading scale, 1.0 is the strongest result. A requirement of 2.7 or better therefore means 2.7 or a numerically lower converted grade; the responsible application service or university makes the formal conversion.

Checks that matter specifically for MSc Medical Microtechnology

1. The first academic test for MSc Medical Microtechnology

   Electrical, computing, mechanical, mechatronics, physical, process or materials engineering, or a comparable degree.

2. The evidence standard for MSc Medical Microtechnology

   The transcript, grades and module descriptions must make each named condition verifiable. The award title is not a content map.

How should an Indian applicant apply for University of Lübeck MSc Medical Microtechnology?

Indian applicants should prepare APS, transcripts and language evidence before they submit first through uni-assist and continue in TH Lübeck’s portal once the joint programme opens its 2027 cycle for Winter 2027/28. No closing date for the joint programme’s 2027 foreign-degree cycle is available yet. The subject map should be ready before submission, not assembled after the window opens.

Applicants with Indian academic records need APS. For this joint degree, a foreign qualification goes to uni-assist first; after that review, the applicant continues in TH Lübeck's portal. APS verifies Indian academic records but does not replace either application step.

The allowances are preparation estimates, not deadlines or processing times published by University of Lübeck. Start dates remain unconfirmed.

The first review is the MSc Medical Microtechnology subject test because a complete upload can’t repair missing academic content. APS and document preparation can start before the application window.

APS, degree records, module descriptions and language evidence can move on separate timelines. Names and award details need to match across the passport and academic documents.

The exact 2027 closing date is not published, so this page gives no invented day. The official programme page must supply the live date before submission.

What jobs can follow University of Lübeck MSc Medical Microtechnology?

The course points toward medical-device development, microfabrication, biomedical optics, engineering research and doctoral study, with a cleanroom semester in Denmark, a 24 ECTS internship and a medical-microtechnology thesis as inspectable proof of study. It does not publish cohort salary or employment percentages.

A German graduate residence period can provide job-search time after MSc Medical Microtechnology; an offer, pay level and later skilled-work residence title still require separate decisions.

The most useful evidence for an employer or research group is a cleanroom semester in Denmark, a 24 ECTS internship and a medical-microtechnology thesis. The assessed map behind it is Lübeck foundations carries 30 ECTS and is described as systems, Matlab, medicine and medical technology; SDU microtechnology semester carries 30 ECTS and is described as cleanroom, multiphysics, optics and clinical project; Research internship and conference carries 30 ECTS and is described as at least 16 full-time weeks; Thesis and colloquium carries 30 ECTS and is described as final microtechnology research.

Officially described directions include medical-device development, microfabrication, biomedical optics, engineering research and doctoral study. These aren’t promised jobs, salaries or placement percentages.

The English-medium classroom helps with study, though German can still widen local job access. The degree alone doesn’t erase the admission limits, course workload or need to build evidence for the intended role.

Who is University of Lübeck MSc Medical Microtechnology for, and who should avoid it?

MSc Medical Microtechnology fits an applicant who can clear the engineering route and prior grade checks and accepts the defined assessment pattern. It is a poor fit for someone seeking a broad conversion degree, guaranteed placement, or a plan financed through assumed student wages.

For MSc Medical Microtechnology, compare engineering route with prior grade before cost. If either MSc Medical Microtechnology row remains unsupported, the related award title isn’t enough.

Inside MSc Medical Microtechnology, Lübeck foundations leads toward Thesis and colloquium. The SDU microtechnology semester block shows whether the middle of this sequence suits the intended learning style.

An MSc Medical Microtechnology decision shouldn’t start with zero tuition. Missing engineering route or rejecting Thesis and colloquium is the stronger reason to choose another course.

What does the 120 CP University of Lübeck MSc Medical Microtechnology curriculum contain?

The 120 ECTS syllabus places Lübeck foundations, SDU microtechnology semester and Thesis and colloquium in one four-semester sequence. Students move from taught or supervised foundations into specialist work and final independent assessment, while the current module catalogue controls the exact elective offering. The module handbook remains the source of truth.

• The standard full-time duration is four semesters
• The complete award carries 120 CP
• Current module catalogues control elective availability

The credit table separates the published blocks rather than inventing a term-by-term timetable. Semester two is compulsory at the University of Southern Denmark in Sønderborg and covers cleanroom microfabrication, multiphysics, optics and a clinical project.

Current module catalogues control named electives and research topics within MSc Medical Microtechnology. Availability can change with staffing, supervision and the semester’s timetable.

The official documents use CP and ECTS for the same European credit-point measure on this page. The table totals 120 ECTS for the complete degree.

Should an Indian applicant shortlist University of Lübeck MSc Medical Microtechnology?

Shortlist MSc Medical Microtechnology only if engineering route, prior grade and all published language conditions are achievable. The academic decision is whether Lübeck foundations and Thesis and colloquium belong in the same study plan for this applicant. Funding must be independent of assumed wages.

Choose MSc Medical Microtechnology for the progression from Lübeck foundations to Thesis and colloquium, not for an assumed placement or salary.

A weak MSc Medical Microtechnology case can't document engineering route or accept SDU microtechnology semester. Its budget must also work without assumed wages.

Sources

These sources support the programme, admission, cost, experience and immigration information used on this page.

Sources checked on September 4, 2026. The next intake covered here is Winter 2027/28; 2027 deadline not published.