EPFL MSc Electrical and Electronic Engineering

What is EPFL MSc Electrical and Electronic Engineering?

EPFL’s MSc Electrical and Electronic Engineering is a full-time 120 ECTS master’s in Lausanne. The route moves from HSS : Introduction to towards Large-scale data science for and prepares students for electronics engineer and signal-processing engineer work. It isn’t a conversion degree, so the relevant bachelor’s foundation must be visible before enrolment.

Bio-nano-chip design and Physics of magnetic resonance point to different decisions inside MSc Electrical and Electronic Engineering. A strong study plan explains why both serve one defined power-systems engineer problem, what method each contributes and which limitation the final project will test rather than hiding behind the breadth of the catalogue.

The later appearance of Test of VLSI systems helps an applicant work backwards from a graduation output. That academic sequence should be planned beside the INR 68.60 lakh full-programme budget, because changing direction after arrival costs both credits and living time in Lausanne.

How much does EPFL MSc Electrical and Electronic Engineering cost for an Indian student?

The two-year planning total is CHF 59,548, about INR 68.60 lakh. It combines four CHF 2,240 international semester invoices, two years of EPFL’s published foreign-student living budget and the CHF 150 foreign-certificate application fee. It is a planning total, not an invoice issued in one payment.

EPFL's living budget is CHF 25,219 a year for a foreign student and describes a rental deposit as money that may be blocked, not spent. Converted at CHF 1 = INR 115.20, derived from ECB daily reference rates for INR and CHF on 29 September 2026. Flights, exchange spreads and the blocked rental deposit are excluded.

The international invoice contains CHF 2,190 tuition and CHF 50 in membership, sports and social-fund charges. EPFL states the fee rule directly.

Only the CHF 730 semester tuition fee is tripled by this measure.EPFL Study Management

The resulting international tuition is CHF 2,190, before the CHF 50 semester charges.

Living costs create most of the financial exposure. EPFL’s foreign-student table includes CHF 10,800 yearly housing, CHF 7,200 food, CHF 1,400 health insurance, transport, liability cover, residence tax, supplies and other expenses. Architecture has an additional published study-visit allowance that should be added where applicable.

The CHF 10,000-per-semester Excellence Fellowship is competitive and limited. It can cover at most four semesters and doesn’t remove the need to pay tuition, rent and other costs on time, so this budget doesn’t assume the fellowship is won.

Can an Indian applicant meet EPFL MSc Electrical and Electronic Engineering entry requirements?

The academic starting point is an electrical, electronic or related engineering bachelor’s with excellent results and the required mathematical and systems foundations. EPFL evaluates the university, curriculum, grades, research references, specialisation, statement and recommendations together. It publishes no universal Indian percentage or CGPA that guarantees admission.

For MSc Electrical and Electronic Engineering, the useful transcript map places the Indian module, credit load, result and official syllabus beside Project in edge computing. That lets the committee judge substance rather than infer readiness from a translated award title.

EPFL can prescribe extra credits for limited gaps, but Distributed intelligent systems (Pas signals the level at which this master’s operates. The discretion doesn’t promise to rebuild the earlier preparation needed for electronics engineer work.

A referee supporting the signal-processing engineer direction should describe work they actually supervised, its standard and the applicant’s decisions. Evidence tied to Multivariable control is more useful than praise that could accompany any postgraduate application.

Four checks that decide an EPFL MSc Electrical and Electronic Engineering file

1. Meeting every published condition still does not secure admission

   EPFL states the limitation plainly.

   Please note that meeting all of these criteria is no guarantee of admission.EPFL MSc Electrical and Electronic Engineering admission criteria

   The committee can still compare academic quality, references, specialisation and the overall file.

2. Only one EPFL master's choice can be submitted

   EPFL permits one master’s application per academic year. Choosing MSc Electrical and Electronic Engineering therefore removes the option to submit a second EPFL programme as an internal safety choice.

3. The translated degree title is not the subject map

   For MSc Electrical and Electronic Engineering, list the completed modules that prove the required academic preparation. Match each claim to credits, results and an official syllabus so any missing depth is visible before payment.

4. Reference timing is separate from the form deadline

   The form closes on 15 December or 31 March, but referees receive one further week. The applicant cannot upload those letters personally, and the file is not processed unless EPFL receives at least two.

How should an Indian student apply for EPFL MSc Electrical and Electronic Engineering in 2027?

The route is one online EPFL application followed by a separate Swiss visa and residence process. Submit by 15 December 2026 or 31 March 2027; visa applicants are advised to use December because that result is expected in late March instead of mid-June.

Choose one EPFL master's, submit the complete online dossier and fee, secure referee letters, meet any offer conditions, then complete the Swiss entry and residence process.

The allowances are Nbyula planning estimates, not processing times published by EPFL (École Polytechnique Fédérale de Lausanne).

The online file accepts English or French documents. A document in another language needs a legalised translation, while the final proof of the qualifying degree may arrive no later than 30 September after admission.

The application fee is CHF 150 for a foreign bachelor’s and isn’t refunded after withdrawal or non-validation. Payment and form validation are both required before the chosen round closes.

The later round is academically available, but its mid-June result reduces the time for the visa, housing and travel. That timing cost matters more for an Indian applicant than any belief that one round has easier academic selection, which EPFL doesn’t state.

What jobs can follow EPFL MSc Electrical and Electronic Engineering?

The programme can support several technical and research directions. EPFL’s institution-wide 2022 survey reported a CHF 88,108 average salary among 315 master’s respondents working in Switzerland, but that isn’t a programme placement rate or a salary promise for this cohort.

electronics engineer, signal-processing engineer and power-systems engineer are curriculum-supported directions for MSc Electrical and Electronic Engineering. They are not a programme-specific placement result, employer commitment or Swiss permit promise.

A electronics engineer portfolio can use Bio-nano-chip design to state the method and Large-scale data science for real-world data to show where that method was tested. The valuable evidence is the student’s own decision, result and limitation, not the EPFL label on its own.

Someone targeting signal-processing engineer work would need a different emphasis: Physics of magnetic resonance imaging can support the specialism, while Test of VLSI systems can make the final output inspectable. Scheduling and prerequisites still decide whether that combination fits one 120 ECTS plan.

After MSc Electrical and Electronic Engineering, Switzerland gives a third-country graduate six months to seek work matching the qualification. A electronics engineer offer still goes through authority review; completing Master project in Electrical and Electronic Engineering doesn’t itself create permission to work.

For a prospective power-systems engineer, French ability, prior experience and the exact vacancy may matter alongside technical evidence from Distributed intelligent systems (Pas donné en 2026-27). EPFL publishes no audited MSc Electrical and Electronic Engineering placement percentage with which to predict that outcome.

In MSc Electrical and Electronic Engineering, HSS : Introduction to project, HSS : Project and Innovation & entrepreneurship in engineering (Inscription nécessitant l’autorisation préalable des enseignants) make the route towards electronics engineer concrete. Their position in Published programme options joins HSS : Introduction to project to Innovation & entrepreneurship in engineering (Inscription nécessitant l’autorisation préalable des enseignants), so the academic story is about a connected capability rather than a collection of fashionable titles.

The Published programme options sequence contains Lab in nanoelectronics, Lab in power electronics and Lab in signal and image processing. For MSc Electrical and Electronic Engineering, that sequence turns electronics, signal processing, communications, power systems, control and microelectronics into assessed work and exposes whether an applicant’s earlier study reaches the level expected for signal-processing engineer problems.

A student shaping MSc Electrical and Electronic Engineering around power-systems engineer work can read Project in AI and machine learning, Project in edge computing and IoT and Project in energy science and technology as one evidence chain. Project in AI and machine learning supplies one part of the method, while Project in energy science and technology shows the later application or project context recorded in Published programme options.

EPFL places Project in nano and optoelectronics, Adaptation and learning and Advanced analog integrated circuit design within Published programme options for this programme. The combination matters because MSc Electrical and Electronic Engineering is built around electronics, signal processing, communications, power systems, control and microelectronics; isolated familiarity with only one topic would not reproduce that breadth.

The published path from Advanced multiprocessor architecture to Analog circuits for biochip passes through Advanced multiprocessor architecture, Advanced networks and Analog circuits for biochip. In a signal-processing engineer portfolio, those assessed components can document technique, implementation and judgement instead of relying on the degree name as evidence.

For MSc Electrical and Electronic Engineering, the cluster Applied biomedical signal processing, Applied data analysis and Applied Electromagnetics for Metamaterial Design sits under Block 2 : Labs and projects. It links the programme’s electronics, signal processing, communications, power systems, control and microelectronics direction to the kind of decisions a power-systems engineer must explain, test and defend in a project.

The curriculum does not present Basics in bioinstrumentation in isolation: nearby choices include Basics in bioinstrumentation, Bioelectronics and biomedical microelectronics and Bio-nano-chip design. That neighbourhood distinguishes MSc Electrical and Electronic Engineering from a broad conversion degree and rewards prior preparation aligned with electronics, signal processing, communications, power systems, control and microelectronics.

Within Block 2 : Labs and projects, EPFL lists Computational optical imaging, Concurrent engineering of space missions and Data visualization. The useful outcome is not exposure to three labels; it is an assessed route in which Computational optical imaging can feed the analysis behind Data visualization for future signal-processing engineer work.

The MSc Electrical and Electronic Engineering catalogue pairs Design technologies for integrated systems, Discrete optimization and Distributed intelligent systems (Pas donné en 2026-27) in Block 2 : Labs and projects. This pairing shows why an applicant whose prior work is software-only and lacks circuits, signals and electronics would face a structural gap: the programme combines foundations and advanced application rather than rebuilding the missing base.

A coherent electronics engineer direction emerges where Embedded system design, Energy conversion and renewable energy and Energy storage in power systems: technologies, applications and future needs are treated as related evidence. Their shared place in Block 2 : Labs and projects connects the stated programme focus, electronics, signal processing, communications, power systems, control and microelectronics, with work that can be inspected after graduation.

Among the published choices for MSc Electrical and Electronic Engineering are Fundamentals of biosensors and electronic biochips, Fundamentals of VLSI design and Hydropower plants: generating and pumping units. Together they move from Fundamentals of biosensors and electronic biochips towards Hydropower plants: generating and pumping units, giving a project supervisor or employer a clearer signal than an undifferentiated list of electives.

The later academic value of Block 2 : Labs and projects comes from combinations such as Industrial electronics I, Industrial electronics II and Information theory and coding. For a prospective power-systems engineer, this part of MSc Electrical and Electronic Engineering supports a defensible specialism while remaining inside the approved 120 ECTS structure.

In MSc Electrical and Electronic Engineering, Introduction to biomedical imaging, Introduction to quantum science and technology and Introduction to the design of space mechanisms make the route towards electronics engineer concrete. Their position in Block 2 : Labs and projects joins Introduction to biomedical imaging to Introduction to the design of space mechanisms, so the academic story is about a connected capability rather than a collection of fashionable titles.

The Block 2 : Labs and projects sequence contains Lessons learned from the space exploration, Life cycle assessment in energy systems and Machine learning. For MSc Electrical and Electronic Engineering, that sequence turns electronics, signal processing, communications, power systems, control and microelectronics into assessed work and exposes whether an applicant’s earlier study reaches the level expected for signal-processing engineer problems.

A student shaping MSc Electrical and Electronic Engineering around power-systems engineer work can read Media security, Microwaves, the basics of wireless communications and Mobile networks as one evidence chain. Media security supplies one part of the method, while Mobile networks shows the later application or project context recorded in Block 2 : Labs and projects.

EPFL places Multivariable control, Nanoelectronics and Nanophotonics within Block 2 : Labs and projects for this programme. The combination matters because MSc Electrical and Electronic Engineering is built around electronics, signal processing, communications, power systems, control and microelectronics; isolated familiarity with only one topic would not reproduce that breadth.

The published path from Neural interfaces to Optimal decision making passes through Neural interfaces, Optical detectors and Optimal decision making. In a signal-processing engineer portfolio, those assessed components can document technique, implementation and judgement instead of relying on the degree name as evidence.

For MSc Electrical and Electronic Engineering, the cluster Physics of magnetic resonance imaging, Physics of photonic semiconductor devices and Power system restructuring and deregulation sits under Block 2 : Labs and projects. It links the programme’s electronics, signal processing, communications, power systems, control and microelectronics direction to the kind of decisions a power-systems engineer must explain, test and defend in a project.

The curriculum does not present Radio frequency circuits design techniques in isolation: nearby choices include Radio frequency circuits design techniques, Reinforcement learning and Research project in electrical engineering (MA3 only). That neighbourhood distinguishes MSc Electrical and Electronic Engineering from a broad conversion degree and rewards prior preparation aligned with electronics, signal processing, communications, power systems, control and microelectronics.

Within Block 2 : Labs and projects, EPFL lists Semiconductor devices II, Semiconductor physics and light-matter interaction and Seminar in physiology and instrumentation. The useful outcome is not exposure to three labels; it is an assessed route in which Semiconductor devices II can feed the analysis behind Seminar in physiology and instrumentation for future signal-processing engineer work.

The MSc Electrical and Electronic Engineering catalogue pairs Space mission design and operations, Space propulsion and Space sustainability, a multidisciplinary approach in Block 2 : Labs and projects. This pairing shows why an applicant whose prior work is software-only and lacks circuits, signals and electronics would face a structural gap: the programme combines foundations and advanced application rather than rebuilding the missing base.

A coherent electronics engineer direction emerges where System programming for Systems-on-chip, Test of VLSI systems and Transdisciplinary project are treated as related evidence. Their shared place in Block 2 : Labs and projects connects the stated programme focus, electronics, signal processing, communications, power systems, control and microelectronics, with work that can be inspected after graduation.

Among the published choices for MSc Electrical and Electronic Engineering are Fundamentals of analog VLSI design, Fundamentals of inference and learning and Semiconductor devices I. Together they move from Fundamentals of analog VLSI design towards Semiconductor devices I, giving a project supervisor or employer a clearer signal than an undifferentiated list of electives.

The later academic value of Group 1 comes from combinations such as Engineering internship (master in Electrical and Electronical engineering) (Stage d’au minimum 17 semaines à partir du 3ème semestre de Master. Inscription par la bourse aux stages), Engineering internship credited with master project (master in Electrical and Electronical engineering) (Stage d’au minimum 8 semaines après le 2e semestre de Master. Inscription par la bourse aux stages) and Master project in Electrical and Electronic Engineering. For a prospective power-systems engineer, this part of MSc Electrical and Electronic Engineering supports a defensible specialism while remaining inside the approved 120 ECTS structure.

The Swiss migration authority gives a third-country MSc Electrical and Electronic Engineering graduate six months to seek work matching the qualification. A electronics engineer offer still needs the applicable authority process; graduation doesn’t turn the search period into an automatic permit.

The federal guidance for foreign workers also leaves the permit with the employer and authorities. For a power-systems engineer, the vacancy, prior experience and language ability therefore matter alongside the MSc Electrical and Electronic Engineering portfolio.

Who is EPFL MSc Electrical and Electronic Engineering for?

MSc Electrical and Electronic Engineering fits an applicant whose earlier work already supports electronics engineer methods and a project idea for signal-processing engineer. Evidence from Project in edge computing and Multivariable control can make that preparation concrete. This isn't a conversion degree: the transcript must carry the foundation before enrolment, not promise to acquire it later.

The positive fit connects earlier evidence, a reason for choosing Large-scale data science for and a final project a future power-systems engineer supervisor can inspect. Admission is one checkpoint in that line, not the purpose of assembling it.

The weak fit combines limited preparation for Semiconductor physics and light-matter with dependence on immediate earnings or a career aim outside electronics engineer work. EPFL’s one-choice rule then favours a neighbouring degree whose academic starting point matches the transcript more closely.

What does the EPFL MSc Electrical and Electronic Engineering curriculum contain?

The official 2026 to 27 study plan publishes 111 named courses, projects and options for MSc Electrical and Electronic Engineering. The table keeps every item once. Students complete an approved 120 ECTS route, so the credits shown across the whole option catalogue are not added together.

The note “Block 2 : Labs and projects” applies to 87 components in this table.

• Complete the approved 120 ECTS full-time master's structure
• Follow mandatory blocks and any specialisation or orientation conditions
• Use prerequisites and semester availability before fixing electives
• Complete the programme's semester project and master's project requirements
• Treat the official regulations and study plan as legally binding
• Recheck the live plan because options may not run every academic year

The table is the reference inventory for the current catalogue, not a personal credit total. The approved route determines which compulsory, optional and project components count towards graduation.

Availability notes and prerequisites matter before an elective is fixed. A named option can belong to the published plan without running in every year or fitting every specialisation timetable.

A coherent study plan moves from prior preparation to advanced depth and one inspectable final project. It shouldn’t be assembled by adding every credit shown in the option catalogue.

Should an Indian applicant shortlist EPFL MSc Electrical and Electronic Engineering?

Shortlist MSc Electrical and Electronic Engineering when the transcript can support Advanced networks and the proposed project has a defensible electronics engineer direction. That academic match matters more than the EPFL name because only one EPFL master’s application can be submitted during the year.

The strongest case for MSc Electrical and Electronic Engineering is a progression from the preparation behind Bio-nano-chip design to a final output a signal-processing engineer supervisor could assess. EPFL doesn't publish a programme-level placement rate, so inspectable work carries more weight than a salary assumption.

The case against this choice is a transcript that cannot support advanced work such as Test of VLSI systems. Competitive review won't reconstruct the missing base, while the INR 68.60 lakh plan and first-six-month work restriction make that mismatch costly.

Sources

These sources support the programme, admission, cost, experience and immigration information used on this page.

Sources checked on September 29, 2026. The next intake covered here is September 2027; closes 31 March 2027.