EPFL MSc Energy Science and Technology

What is EPFL MSc Energy Science and Technology?

EPFL’s MSc Energy Science and Technology is a full-time 120 ECTS master’s in Lausanne. The route moves from Charge transport in energy towards Advanced lab in electrical and prepares students for energy-systems engineer and renewables engineer work. It isn’t a conversion degree, so the relevant bachelor’s foundation must be visible before enrolment.

Fundamentals of electrical circuits and Industrial electronics II point to different decisions inside MSc Energy Science and Technology. A strong study plan explains why both serve one defined decarbonisation analyst problem, what method each contributes and which limitation the final project will test rather than hiding behind the breadth of the catalogue.

The later appearance of Sustainability assessment of urban helps an applicant work backwards from a graduation output. That academic sequence should be planned beside the INR 68.60 lakh full-programme budget, because changing direction after arrival costs both credits and living time in Lausanne.

How much does EPFL MSc Energy Science and Technology cost for an Indian student?

The two-year planning total is CHF 59,548, about INR 68.60 lakh. It combines four CHF 2,240 international semester invoices, two years of EPFL’s published foreign-student living budget and the CHF 150 foreign-certificate application fee. It is a planning total, not an invoice issued in one payment.

EPFL's living budget is CHF 25,219 a year for a foreign student and describes a rental deposit as money that may be blocked, not spent. Converted at CHF 1 = INR 115.20, derived from ECB daily reference rates for INR and CHF on 29 September 2026. Flights, exchange spreads and the blocked rental deposit are excluded.

The international invoice contains CHF 2,190 tuition and CHF 50 in membership, sports and social-fund charges. EPFL states the fee rule directly.

Only the CHF 730 semester tuition fee is tripled by this measure.EPFL Study Management

The resulting international tuition is CHF 2,190, before the CHF 50 semester charges.

Living costs create most of the financial exposure. EPFL’s foreign-student table includes CHF 10,800 yearly housing, CHF 7,200 food, CHF 1,400 health insurance, transport, liability cover, residence tax, supplies and other expenses. Architecture has an additional published study-visit allowance that should be added where applicable.

The CHF 10,000-per-semester Excellence Fellowship is competitive and limited. It can cover at most four semesters and doesn’t remove the need to pay tuition, rent and other costs on time, so this budget doesn’t assume the fellowship is won.

Can an Indian applicant meet EPFL MSc Energy Science and Technology entry requirements?

The academic starting point is a mechanical, electrical, chemical or related engineering bachelor’s with excellent academic records. EPFL evaluates the university, curriculum, grades, research references, specialisation, statement and recommendations together. It publishes no universal Indian percentage or CGPA that guarantees admission.

For MSc Energy Science and Technology, the useful transcript map places the Indian module, credit load, result and official syllabus beside Heat pump systems. That lets the committee judge substance rather than infer readiness from a translated award title.

EPFL can prescribe extra credits for limited gaps, but Life cycle assessment in signals the level at which this master’s operates. The discretion doesn’t promise to rebuild the earlier preparation needed for energy-systems engineer work.

A referee supporting the renewables engineer direction should describe work they actually supervised, its standard and the applicant’s decisions. Evidence tied to Energy and comfort in is more useful than praise that could accompany any postgraduate application.

Four checks that decide an EPFL MSc Energy Science and Technology file

1. Meeting every published condition still does not secure admission

   EPFL states the limitation plainly.

   Please note that meeting all of these criteria is no guarantee of admission.EPFL MSc Energy Science and Technology admission criteria

   The committee can still compare academic quality, references, specialisation and the overall file.

2. Only one EPFL master's choice can be submitted

   EPFL permits one master’s application per academic year. Choosing MSc Energy Science and Technology therefore removes the option to submit a second EPFL programme as an internal safety choice.

3. The translated degree title is not the subject map

   For MSc Energy Science and Technology, list the completed modules that prove the required academic preparation. Match each claim to credits, results and an official syllabus so any missing depth is visible before payment.

4. Reference timing is separate from the form deadline

   The form closes on 15 December or 31 March, but referees receive one further week. The applicant cannot upload those letters personally, and the file is not processed unless EPFL receives at least two.

How should an Indian student apply for EPFL MSc Energy Science and Technology in 2027?

The route is one online EPFL application followed by a separate Swiss visa and residence process. Submit by 15 December 2026 or 31 March 2027; visa applicants are advised to use December because that result is expected in late March instead of mid-June.

Choose one EPFL master's, submit the complete online dossier and fee, secure referee letters, meet any offer conditions, then complete the Swiss entry and residence process.

The allowances are Nbyula planning estimates, not processing times published by EPFL (École Polytechnique Fédérale de Lausanne).

The online file accepts English or French documents. A document in another language needs a legalised translation, while the final proof of the qualifying degree may arrive no later than 30 September after admission.

The application fee is CHF 150 for a foreign bachelor’s and isn’t refunded after withdrawal or non-validation. Payment and form validation are both required before the chosen round closes.

The later round is academically available, but its mid-June result reduces the time for the visa, housing and travel. That timing cost matters more for an Indian applicant than any belief that one round has easier academic selection, which EPFL doesn’t state.

What jobs can follow EPFL MSc Energy Science and Technology?

The programme can support several technical and research directions. EPFL’s institution-wide 2022 survey reported a CHF 88,108 average salary among 315 master’s respondents working in Switzerland, but that isn’t a programme placement rate or a salary promise for this cohort.

energy-systems engineer, renewables engineer and decarbonisation analyst are curriculum-supported directions for MSc Energy Science and Technology. They are not a programme-specific placement result, employer commitment or Swiss permit promise.

A energy-systems engineer portfolio can use Fundamentals of electrical circuits and systems II to state the method and Advanced lab in electrical energy systems to show where that method was tested. The valuable evidence is the student’s own decision, result and limitation, not the EPFL label on its own.

Someone targeting renewables engineer work would need a different emphasis: Industrial electronics II can support the specialism, while Sustainability assessment of urban systems can make the final output inspectable. Scheduling and prerequisites still decide whether that combination fits one 120 ECTS plan.

After MSc Energy Science and Technology, Switzerland gives a third-country graduate six months to seek work matching the qualification. A energy-systems engineer offer still goes through authority review; completing Master project in Energy, Science and Technology doesn’t itself create permission to work.

For a prospective decarbonisation analyst, French ability, prior experience and the exact vacancy may matter alongside technical evidence from Life cycle assessment in energy systems. EPFL publishes no audited MSc Energy Science and Technology placement percentage with which to predict that outcome.

In MSc Energy Science and Technology, Charge transport in energy conversion and storage, Convex optimization and Energy conversion and renewable energy make the route towards energy-systems engineer concrete. Their position in Published programme options joins Charge transport in energy conversion and storage to Energy conversion and renewable energy, so the academic story is about a connected capability rather than a collection of fashionable titles.

The Published programme options sequence contains Energy conversion and renewable energy, Energy supply, economics and transition and Fundamentals & processes for photovoltaic devices. For MSc Energy Science and Technology, that sequence turns energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis into assessed work and exposes whether an applicant’s earlier study reaches the level expected for renewables engineer problems.

A student shaping MSc Energy Science and Technology around decarbonisation analyst work can read Heat pump systems, Hydraulic turbomachines and HSS : Introduction to project as one evidence chain. Heat pump systems supplies one part of the method, while HSS : Introduction to project shows the later application or project context recorded in Published programme options.

EPFL places HSS : Introduction to project, HSS : Project and Project in energy I within Block 1 for this programme. The combination matters because MSc Energy Science and Technology is built around energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis; isolated familiarity with only one topic would not reproduce that breadth.

The published path from Project in energy I to Air pollution passes through Project in energy I, Advanced heat transfer and Air pollution. In a renewables engineer portfolio, those assessed components can document technique, implementation and judgement instead of relying on the degree name as evidence.

For MSc Energy Science and Technology, the cluster Discrete optimization, Energy systems engineering and Fundamentals of electrical circuits and systems I sits under Block 5 “Options”. It links the programme’s energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis direction to the kind of decisions a decarbonisation analyst must explain, test and defend in a project.

The curriculum does not present Fundamentals of electrical circuits and systems I in isolation: nearby choices include Fundamentals of electrical circuits and systems I, Fundamentals of electrical circuits and systems II and Heat and mass transfer. That neighbourhood distinguishes MSc Energy Science and Technology from a broad conversion degree and rewards prior preparation aligned with energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis.

Within Block 5 “Options”, EPFL lists Heat and mass transfer, Hydroacoustic for hydropower plants and Hydropower plants: generating and pumping units. The useful outcome is not exposure to three labels; it is an assessed route in which Heat and mass transfer can feed the analysis behind Hydropower plants: generating and pumping units for future renewables engineer work.

The MSc Energy Science and Technology catalogue pairs Industrial electronics I, Life cycle assessment in energy systems and Liquid-gas interfacial heat and mass transfer in Block 5 “Options”. This pairing shows why an applicant seeking energy policy without thermodynamics, systems and quantitative engineering would face a structural gap: the programme combines foundations and advanced application rather than rebuilding the missing base.

A coherent energy-systems engineer direction emerges where Liquid-gas interfacial heat and mass transfer, Machine learning I and Negotiation techniques (Special schedule. See the MTE website: are treated as related evidence. Their shared place in Block 5 “Options” connects the stated programme focus, energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis, with work that can be inspected after graduation.

Among the published choices for MSc Energy Science and Technology are Negotiation techniques (Special schedule. See the MTE website:, Nuclear fusion and plasma physics and Power systems analysis. Together they move from Negotiation techniques (Special schedule. See the MTE website: towards Power systems analysis, giving a project supervisor or employer a clearer signal than an undifferentiated list of electives.

The later academic value of Block 5 “Options” comes from combinations such as Principles of finance, Principles of microeconomics and Solid waste engineering (Pas donné en 2026-27). For a prospective decarbonisation analyst, this part of MSc Energy Science and Technology supports a defensible specialism while remaining inside the approved 120 ECTS structure.

In MSc Energy Science and Technology, Solid waste engineering (Pas donné en 2026-27), Water resources engineering and management and Advanced control systems make the route towards energy-systems engineer concrete. Their position in Block 5 “Options” joins Solid waste engineering (Pas donné en 2026-27) to Advanced control systems, so the academic story is about a connected capability rather than a collection of fashionable titles.

The Group 2 sequence contains Advanced lab in electrical energy systems, Applied data analysis and Development engineering (Technology innovation for development, humanitarian action and peace). For MSc Energy Science and Technology, that sequence turns energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis into assessed work and exposes whether an applicant’s earlier study reaches the level expected for renewables engineer problems.

A student shaping MSc Energy Science and Technology around decarbonisation analyst work can read Development engineering (Technology innovation for development, humanitarian action and peace), Distributed intelligent systems (Pas donné en 2026-27) and Electromagnetic compatibility as one evidence chain. Development engineering (Technology innovation for development, humanitarian action and peace) supplies one part of the method, while Electromagnetic compatibility shows the later application or project context recorded in Group 2.

EPFL places Electromagnetic compatibility, Energy and comfort in buildings and Energy storage in power systems: technologies, applications and future needs within Group 2 for this programme. The combination matters because MSc Energy Science and Technology is built around energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis; isolated familiarity with only one topic would not reproduce that breadth.

The published path from Engines and fuel cells to Hydropower schemes and pumped-storage passes through Engines and fuel cells, Environmental transport phenomena and Hydropower schemes and pumped-storage. In a renewables engineer portfolio, those assessed components can document technique, implementation and judgement instead of relying on the degree name as evidence.

For MSc Energy Science and Technology, the cluster Hydropower schemes and pumped-storage, Industrial electronics II and Industrial process and energy systems engineering sits under Group 2. It links the programme’s energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis direction to the kind of decisions a decarbonisation analyst must explain, test and defend in a project.

The curriculum does not present Industrial process and energy systems engineering in isolation: nearby choices include Industrial process and energy systems engineering, Material flow analysis and resource management and Model predictive control. That neighbourhood distinguishes MSc Energy Science and Technology from a broad conversion degree and rewards prior preparation aligned with energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis.

Within Group 2, EPFL lists Power system restructuring and deregulation, Power systems dynamics and Renewable energy (for ME). The useful outcome is not exposure to three labels; it is an assessed route in which Power system restructuring and deregulation can feed the analysis behind Renewable energy (for ME) for future renewables engineer work.

The MSc Energy Science and Technology catalogue pairs Renewable energy (for ME), Semiconductor devices I and Smart grids technologies in Group 2. This pairing shows why an applicant seeking energy policy without thermodynamics, systems and quantitative engineering would face a structural gap: the programme combines foundations and advanced application rather than rebuilding the missing base.

A coherent energy-systems engineer direction emerges where Smart grids technologies, Solar energy conversion and Sustainability assessment of urban systems are treated as related evidence. Their shared place in Group 2 connects the stated programme focus, energy conversion, storage, renewables, grids, thermodynamics and energy-system analysis, with work that can be inspected after graduation.

Among the published choices for MSc Energy Science and Technology are Water and sanitation for development, Water and wastewater treatment and Project in energy II. Together they move from Water and sanitation for development towards Project in energy II, giving a project supervisor or employer a clearer signal than an undifferentiated list of electives.

The later academic value of Group 3 comes from combinations such as Project in energy II, Engineering internship credited with master project (master in Energy science and technology) (Stage d’au minimum 8 semaines après le 2e semestre de Master. Inscription par la bourse aux stages) and Master project in Energy, Science and Technology. For a prospective decarbonisation analyst, this part of MSc Energy Science and Technology supports a defensible specialism while remaining inside the approved 120 ECTS structure.

The Swiss migration authority gives a third-country MSc Energy Science and Technology graduate six months to seek work matching the qualification. A energy-systems engineer offer still needs the applicable authority process; graduation doesn’t turn the search period into an automatic permit.

The federal guidance for foreign workers also leaves the permit with the employer and authorities. For a decarbonisation analyst, the vacancy, prior experience and language ability therefore matter alongside the MSc Energy Science and Technology portfolio.

Who is EPFL MSc Energy Science and Technology for?

MSc Energy Science and Technology fits an applicant whose earlier work already supports energy-systems engineer methods and a project idea for renewables engineer. Evidence from Heat pump systems and Energy and comfort in can make that preparation concrete. This isn't a conversion degree: the transcript must carry the foundation before enrolment, not promise to acquire it later.

The positive fit connects earlier evidence, a reason for choosing Advanced lab in electrical and a final project a future decarbonisation analyst supervisor can inspect. Admission is one checkpoint in that line, not the purpose of assembling it.

The weak fit combines limited preparation for Power systems dynamics with dependence on immediate earnings or a career aim outside energy-systems engineer work. EPFL’s one-choice rule then favours a neighbouring degree whose academic starting point matches the transcript more closely.

What does the EPFL MSc Energy Science and Technology curriculum contain?

The official 2026 to 27 study plan publishes 57 named courses, projects and options for MSc Energy Science and Technology. The table keeps every item once. Students complete an approved 120 ECTS route, so the credits shown across the whole option catalogue are not added together.

• Complete the approved 120 ECTS full-time master's structure
• Follow mandatory blocks and any specialisation or orientation conditions
• Use prerequisites and semester availability before fixing electives
• Complete the programme's semester project and master's project requirements
• Treat the official regulations and study plan as legally binding
• Recheck the live plan because options may not run every academic year

The table is the reference inventory for the current catalogue, not a personal credit total. The approved route determines which compulsory, optional and project components count towards graduation.

Availability notes and prerequisites matter before an elective is fixed. A named option can belong to the published plan without running in every year or fitting every specialisation timetable.

A coherent study plan moves from prior preparation to advanced depth and one inspectable final project. It shouldn’t be assembled by adding every credit shown in the option catalogue.

Should an Indian applicant shortlist EPFL MSc Energy Science and Technology?

Shortlist MSc Energy Science and Technology when the transcript can support Advanced heat transfer and the proposed project has a defensible energy-systems engineer direction. That academic match matters more than the EPFL name because only one EPFL master’s application can be submitted during the year.

The strongest case for MSc Energy Science and Technology is a progression from the preparation behind Fundamentals of electrical circuits to a final output a renewables engineer supervisor could assess. EPFL doesn't publish a programme-level placement rate, so inspectable work carries more weight than a salary assumption.

The case against this choice is a transcript that cannot support advanced work such as Sustainability assessment of urban. Competitive review won't reconstruct the missing base, while the INR 68.60 lakh plan and first-six-month work restriction make that mismatch costly.

Sources

These sources support the programme, admission, cost, experience and immigration information used on this page.

Sources checked on September 29, 2026. The next intake covered here is September 2027; closes 31 March 2027.