University of Bremen MSc Control, Microsystems and Microelectronics

What is the University of Bremen MSc Control, Microsystems and Microelectronics?

This two-year, 120 CP course is for electrical, automation, microelectronics and microsystems graduates who want hardware and control in one degree. Applicants must clear the degree, grade and aptitude-test rules. There’s no ordinary tuition; an Indian student should plan INR 28.41 lakh for 24 months, semester contributions, APS and the visa fee.

The study plan combines compulsory hardware and automation work with laboratory choices, electives, a large project and the thesis. This page covers the Summer 2027 intake. First-semester applications run through MOIN from 1 August to 15 October 2026, and the new 2.3, C1 and aptitude-test conditions apply to that intake.

How much does University of Bremen MSc Control, Microsystems and Microelectronics cost?

The two-year planning total is EUR 25,820.16, approximately INR 28.41 lakh. It combines the university’s EUR 992 monthly minimum, four current semester contributions, the German visa fee and the APS processing fee paid in India. It doesn’t include flights, deposits or discretionary spending.

The EUR 11,904 blocked account is the first twelve months of living money and is not added again. VFS charges and provider fees remain outside this total. Euro items are converted at EUR 1 = INR 110.0485, the ECB reference rate on 2 September 2026. The visa row uses the German Missions’ published INR 8,400 collection amount, while APS is already priced in rupees.

“Blocked bank account (“Sperrkonto”) in Germany with sufficient funds to cover the first year of studies”German Missions in India, study visa funding rule

The German Missions in India funding rule supports the blocked-account figure used here. The dated rupee conversion and its European Central Bank reference series are stated directly in the cost note above.

The University of Bremen does not charge ordinary tuition for this consecutive master’s, but every student pays a semester contribution. The winter 2026/27 amount is held constant across four semesters only to show the arithmetic; it isn’t a promise that later contributions will stay unchanged.

The EUR 992 monthly benchmark already includes the university’s allowance for health insurance. Adding a separate standard insurance estimate would double count it. You’ll still need room for rent variation, travel, deposits, residence-permit charges, exchange spreads and personal spending.

Because this subject commonly follows an engineering or business degree, the summer 2027 APS rule may also make the EUR 150 dMAT compulsory, depending on the exact prior award. That conditional charge is not added to the headline because it does not apply to every applicant. An affected student should add EUR 150 and allow time for the certificate to reach APS.

Can an Indian applicant meet University of Bremen MSc Control, Microsystems and Microelectronics entry rules?

You can qualify with a 180 ECTS degree in Electrical Engineering, Automation Engineering, Microelectronics, Microsystems Technology or a course with no substantial differences. That degree must also clear the 2.3 grade limit, the faculty test and English C1. Applicants still completing the award may apply after documenting 140 CP.

The published material does not specify the aptitude test’s format, duration, permitted aids or sample questions. Treat those details as unresolved until the faculty sends current instructions.

If capacity is restricted later, relevant professional or extracurricular experience can improve the evaluated specialisation grade by 0.5, capped at 1.0. It cannot repair a missed 2.3 threshold or a failed test.

For an engineering award covered by dMAT, the first announced certificate date is 12 October 2026, only three days before Bremen closes Summer 2027 applications. APS has not promised that it can issue the required certificate in that interval. This intake is workable only where APS confirms a viable sequence.

The academic English route and the visa officer’s language evidence are separate checks. The underlying certificate or English-taught award evidence remains useful even when Bremen accepts it for admission.

Three checks that decide a CMM application

1. Open admission still includes a grade limit and test

   Open admission describes the current capacity status. It does not waive the German-equivalent 2.3 maximum, the 50% aptitude-test pass mark, the qualifying-degree rule or English C1.

2. Show control and microelectronics in the transcript

   Create a short matrix that pairs each relevant original module with its credit value and official syllabus pages. Highlight circuit, digital-system, sensor, control and microelectronics content instead of relying on a broad Electrical Engineering title.

3. Use the later-document route only with a realistic finish date

   The 140 CP route lets an unfinished degree enter assessment, but it does not remove completion. The degree and C1 evidence are due within two weeks after classes begin, and the final certificate is due by 30 June under the regulation.

How should an Indian applicant apply for University of Bremen MSc Control, Microsystems and Microelectronics?

Apply directly through MOIN during 1 August to 15 October for Summer 2027. The closing date is 15 October 2026. APS, academic mapping and language evidence should run well before the portal window because an incomplete file at the exclusion deadline can be rejected.

The University of Bremen MOIN portal is the direct route and no uni-assist VPD is required. Bremen permits only one master’s application per semester, so the programme choice must be final before submission.

The allowances are Nbyula planning estimates, not processing times published by University of Bremen.

Subject eligibility comes before document collection because a complete upload cannot succeed when the prior curriculum misses an exclusion criterion. A safe working plan allows at least three months for APS before the Bremen deadline, with more time where dMAT applies.

Transcripts, grading information, medium-of-instruction evidence and detailed syllabi are best requested early from the awarding institution. Certified translations are needed where the portal requires them, and names must remain consistent across academic, APS and passport records.

For an applicant whose prior degree triggers dMAT, the first stated certificate date is 12 October 2026. That is only three days before this programme closes, and APS cannot issue its certificate until the dMAT result is checked. An affected Summer 2027 file therefore needs current written instructions rather than an assumption that APS can finish in three days.

What jobs can follow University of Bremen MSc Control, Microsystems and Microelectronics?

Bremen connects CMM with research, planning, development and implementation in microsystems, microelectronics, information engineering and automation. Its laboratories, 18 CP project and thesis can show that range. Germany’s post-study route offers eligible graduates up to 18 months to seek skilled work, but it isn’t a placement promise.

The 18-month period gives an eligible graduate time to search and work while searching. A job offer, salary and later skilled-work permit remain separate outcomes.

A useful application portfolio would separate the student’s contribution to each laboratory and project. Schematics, test results, control models and design decisions can demonstrate more than a transcript alone, provided confidential material is removed.

The degree’s unusual strength is the ability to speak across sensing, circuits and automation teams. A candidate who specialises carefully through electives and the thesis can present a clearer profile than someone who treats every branch equally.

German is not the teaching language, but it can widen access to local engineering teams and suppliers. Students should budget time for language learning without assuming part-time work will finance the degree.

Who is University of Bremen MSc Control, Microsystems and Microelectronics for, and who should avoid it?

This course best fits an electrical or automation graduate who can prove both circuit-level and systems-level preparation. It is a weak choice for a software converter or for someone who wants only VLSI design and will resent compulsory work in sensing, control and automation.

Degree-route eligibility and the test content come before a decision on whether the broad curriculum matches the intended specialism. Because only one Bremen master’s application is allowed each semester, an uncertain match has an unusually high opportunity cost.

A strong match should be able to name a plausible project question that needs both hardware and control. That is a better signal of fit than interest in microelectronics alone.

The course can support doctoral plans, industrial development or automation work, but none is automatic. Its value depends on the work produced during the degree.

What does the 120 CP University of Bremen MSc Control, Microsystems and Microelectronics curriculum contain?

The published four-semester structure totals 120 CP and develops control technology, microelectronics, microsystems, digital hardware, sensors and automation. Its defining feature is this. The compulsory study joins BioMEMS, integrated circuits, digital design, measurement systems, power-grid automation and control before an 18 CP project. The table uses official credit blocks and avoids promising individual electives that may rotate.

• The standard full-time duration is four semesters
• The complete award carries 120 CP
• Current module catalogues control elective availability

The blocks progress towards two specialist laboratory records, an 18 CP systems project and a hardware or control thesis. Early modules establish methods, later choices narrow the subject, and the final project or thesis should show a coherent question rather than unrelated elective collecting.

Elective names and research topics can change with staffing and current work. The latest module handbook and timetable therefore control whether one attractive option is actually available before enrolment.

Should an Indian applicant shortlist University of Bremen MSc Control, Microsystems and Microelectronics?

Shortlist CMM if your transcript already joins electrical-engineering fundamentals with control, circuits or microsystems, and only then. The April 2027 admission rules require a German-equivalent grade of 2.3 or better, English C1 and at least 50% in the faculty aptitude test.

The attraction is range across device, circuit and system scales. That breadth can support research and development work, but it offers less room for someone who wants a degree devoted almost entirely to VLSI or chip design. The choice should turn on whether compulsory control and automation work strengthens or distracts from the intended profile.

Two things are genuinely hard here. A related degree title cannot compensate for weak evidence in the tested electrical and microelectronics foundations. And open admission does not mean automatic admission, because every academic, test and language condition still has to be cleared before enrolment.

Sources

These sources support the programme, admission, cost, experience and immigration information used on this page.

Sources checked on September 2, 2026. The next intake covered here is Summer 2027; apply by 15 October 2026.